Fencia FC-6S FTTH Optic Kit - Enhanced Assembly Tool with FC-6S Fiber Cleaver, Optical Power Meter Finder 5km, and Visual Fault Locator 1mw in Black Review

When I received the product, the splitter would not close. It was found that the magnet that is supposed to keep the lid closed was not glued properly. Return of the entire set.

First everything works in this kit. Having a separate laser and cable tester was very convenient as most kits include them all in one unit. The tester's button functions are a bit odd and take some getting used to, but the show doesn't stop there. The only drawback is that the batteries in the tester ran out pretty quickly.

Contains most of the tools needed to connect the fiber (excluding connectors). I feel like if he had a good pair of Kevlar scissors he would have it all. I ended up using pre-polished connectors (about $10-15 per connector) and it works great for that. Since this is my first time unplugging this kit, it worked like a champ. I would buy this again in a heartbeat.

This tester requires AA batteries (not included or listed in product description) but AA batteries are too big for the unit and AAA batteries are too small. This was ordered for a specific job and now I don't have the equipment for that job because AMAZON will not replace it with a product that works. The fourth representative at AMAZON, Mary (supervisor), handled the exchange with another test kit that should work.

This set got me out of my predicament. Luckily I had an extra foot of fiber to work with because the stripping tool didn't quite get the job done. I've tried short strips, long strips, and even strips with light pressure, but the tool never cut to the right depth and kept breaking the fiber. After about 50 tries I removed the fiber and used alcohol wipes to clean the fiber wrap. The cutting tool did a great job and in the end the timing helped me, so this is a tool for extreme situations, not…

Very happy with this kit, the meter works better than the one my employer bought for $500 and you have to toggle the screens to get a reading, in contrast to this meter display, both readings on one screen. Very happy and impressed that my colleagues who have been using Fiber longer than me are amazed at the ease of use as opposed to our work counters. People often ask where I bought it and everyone is shocked at such a low price for a good and easy to use tool set! No problem, but I take great

So I've never worked with fiberglass before. I ran a 100 meter cable from my house to an outbuilding on my property so I could access the internet and phone. During the run I broke one of the ends of the SC while pulling it through the line. To my surprise, professional kits cost over $1,000 just to put the end back on. I figured it would be worth trying a cheap set before trying to get someone to work, so I bought this one. The splitter worked fine. The stripper requires some patience. It took

First, the cleaver works great. I terminated 6 fibers with it (5 of the 6-wire OM3 and one of the 12-wire 10Gb) and all my ends passed with flying colors. Instructions won't help, so you need to know how to work with one of these splitters and what splitting length in mm you need for your chosen ends and so on. Despite this, I had no problems and did everything right the first time. I had an issue with the fiber scraper, which is fairly basic and a bit crude for its intended purpose. I could…