🚽 Fluidmaster B1T09CS CLICK SEAL Toilet Connector: Durable Stainless Steel Braided Hose - 3/8 Female Compression Thread x 7/8 Female Ballcock Thread, 9-Inch Length Review

I really like the locking feature that lets me know when the connector is sealed. It is easy to use due to the durability of the stainless steel.

Had to recently install new work in the toilet. My toilet tank is very close to the water lines and I couldn't find a 9 inch water line at retail. I ordered this, it worked great and got here quickly.

There was a weird old plug that couldn't be easily measured so I bought it and got a waterproof seal in minutes. I use these "click" leads around the house: they're very simple, they work like a gas cap, but you have to bend down a little for it to click.

Overall I like this hose but the threads are a bit odd. I thought I tightened it tight enough but ended up with a ton of water when I opened the waterline. The plastic screw end will require a lot more tightening than you think, so keep that in mind.

Connection never clicked. I found it was leaking after a few hours, the floor was quite wet. Being able to tighten it tight stopped the leak so I ordered another supply hose and inlet valve in case I overloaded the existing one (which was new but not a risk). The new hose is fine, but I'll keep a close eye on it!

I used it with the bidet tee but it didn't have enough room to actually block it. I went to the nearest Home Depot store and bought a regular plug which ended up working fine. There really wasn't anything wrong with mine, it would have worked with a 95% chance if used straight from the tap to the toilet. I missed the return date when I remembered I still had it.

Like many others, I bought a bidet and needed a different supply line. I was planning to switch to HD but decided that one less ride would be in everyone's interest. Delivered the same day, easy to install. The click function worked great with no leaks. The 9 inch version was the perfect length for my setup, with a little extra length that I could "squirm" without kinking. Very satisfied.

"Click-Seal" sounds like a trick, but it is pretty helpful. A common problem with a simple installation is the temptation to over-tighten this nut. The seal is relatively soft and seals well without much pressure. Over-tightening, at least over time, will cause the gasket to sink into the pipe and expand at the edges, creating a leak. Click-Seal eliminates guesswork. It's like the gas cap on your car. All in all, this feedline is well made and free from flaws. I would like to give a little…