📷 5 Packs of Stainless Steel D Shaft D-Ring 1/4" Tripod Screw, Mounting Screw Adapter, Quick Release Camera Screw for Camera Camcorder Tripod Monopod with QR Quick Release Plate Review

I added a small audio mixer to the camera to mix sound from a wireless microphone as well as a local wired microphone . The wireless mic receiver has a 1/4-20 hole to attach it to anything, but it didn't come with the hardware to attach it to anything. My audio mixer, which attaches to a hot shoe on top of the camera, has a long cold shoe-sized slot on each side, plus one on top. One of these adapters allows me to add a wireless mic receiver to the side of my audio mixer, and I have a few…

I wanted to make it easier for me to remove the Leofoto L-Bracket and Peak Design Lock Plate on-site without losing the Allen key that goes with the included screws fits both initially. To do this, I tried removing the tripod screws from some of the Arca-Swiss plates, but there wasn't enough clearance between the threads and the head to be able to move them along the screw tracks. These 1/4" tripod screws solved that problem so I can now remove them in the field without tools. The heads are…

I only had to throw one out. All but two don't fit any of the 1/4" bolts in my opinion. This is because they cut a groove in the bottom after the internal thread and left a burr. Just find a 1/4" male which is longer than these things and wear it top to bottom.This will clean the threads and you can tighten them with your fingers.One other thing - I was skeptical about the thread height being enough for the job - the thread on the outside of the 3/8" is only about 60%. But that's more than…

Best value of the others listed. For just a few greens, you can get not one, but two of these hot shoe adapters, and they even come with a lens cleaning cloth. I know, I know, way more for just two screws and a bolt. I agree but it's better than just getting one and they work really fantastic. The screws fit well and easily and I have no problem attaching my Zoom H4n to the Sony A6000. I keep one in my bag and the other on the shelf for safekeeping. The fabric was a pretty good size so I cut it

I originally bought these because one-piece bolt-on boots are more expensive, which seemed like a better deal. I was wrong. The first one I tried had a thread stripped, causing the secondary screw-on part to fly off. If I "fixed" an object in it, it would fall to the ground. It also doesn't level well as you have no mechanism to measure when it's attached to the rig. Basically you are forced to twist it on a 1/4"-20 screw and hope it straightens out as you tighten. I would use the more…

I just got a "flash shoe adapter V1" and a piece of metal fell on the floor of one of the flash shoes when I was screwing it on. I'm glad it fell off before trying to attach anything to it, otherwise I could have broken expensive gear. There is no way to screw the metal back on so I'll try to glue it on as I needed them this weekend and don't have time to buy a replacement. Fingers penetrate adhesive bonds with plastic better than tiny screws in production. Thankfully this weekend they only…

Pros: They're very cheap Cons: Thumbscrews are loose and loose until you tighten the screw, which shows that thumbscrews, while not secured, are wider than the screw head, so they interfere with tightening the Screw prevents proper seating. Even if you force it tight, part of your thumb would not land on the body of the QR plate, making it impossible to place the plate on the base. A good thing was that they were made so cheaply. that when the screw is tightened correctly, the thumb flap breaks

There are a few problems with them: First, the fit and finish is rough. You can feel it when you hold it in your hand. They had to be deburred in the tumbler as they feel like sharp edges. Second, the D-ring hinge is positioned so that the axis of the ring is over the base of the head. So when you unroll the ring to rotate it, it won't be fully seated. To improve this, you have to flip the D-ring down and tighten it with a flathead screwdriver, which defeats the purpose of the D-ring and…

Dislike Adapter Sleeve Kit? I'll tell you: the lack of thread. They only make two full turns. Common sense dictates that you need at least three fasteners of each size to achieve acceptable strength. Otherwise not much for her. They arrived early and came with a cleaning cloth, just like almost every photographic accessory. Product And it is good value for money 4 stars: Works exactly as advertised, fit/finish is as expected, buying this type of product can have a small flaw 3 stars: Works…

Pros: They're bloody cheap Cons: Thumbscrews are loose and loose until you tighten the screw, which shows that although the thumbscrews are loosely fitted, they are wider than the screw head so they get in that way and The way the screw is tightened will prevent it from seating properly. Even if you force it tight, part of your thumb would not land flat on the body of the QR plate, which would then make it impossible to place the plate on the base. A good thing was that they were made so…