❄️ Frosty Ice Cube Plus Thermal Pad - 12.8 W/mK, 85x85mm, Dark Gray (2.0mm): Superior Cooling Solution for Efficient Heat Transfer Review

Seems very similar to Thermalright but you get more stuff for your money. Works great so far on my 2080 Ti. My standard thermal pads got pretty rough after a few reuses and have been replaced with 1mm Frosty Ice Cube. The idle dropped a few degrees. But the big win was a 19-degree drop in my memory temperature in tests. Like I said my stocks have been pretty bad so I saw 109C and now on the Superposition and Heaven benches it's around 85C. Happy customer!

My first impressions are very positive, it dropped my VRAM temp by 14 degrees and let the fans run less and also got cooler temps and I'm all Set still have about half the amount left in case I need to reapply, total 100% worth.

Currently being tested but seems to be on par in terms of thermal conductivity compared to the Thermalright 12.8W/mK thermal pad. I've been a Thermalright user for all my other GPUs, but decided to give this one a try since it's 1) cheaper 2) twice the thermal material compared to Thermalright. First, Thermalright pads are overpriced as buying the exact same item directly from China (via Aliexpress) is much cheaper, but you have to be patient and wait for the shipment. For that reason alone I…

I received the 3090 FE 12 days ago and quickly realized that it never went above 115mh/s for ETH when mining. HWMonitor showed a memory temperature of 110 degrees Celsius! Ouch! So I did some research and decided to swap out the thermal pads on the back for fear of steps to get to the other side of the card and that it might be quite effective. I set the pads to match Matthew Lloyd's layout and when I'm done my temps are 100 degrees Celsius and I'm getting 118MHz for ETH, still not great but…

I used 1.00mm and 1.5mm thick thermal pads to overhaul the Vega64 cooling. Initial memory temp reached 78 before crashing shortly after. (Within 20 minutes of gameplay) MOSFET and other chips were also significantly higher before being used. After switching to these thermal pads, I'm sitting at 36 degrees after several hours of gaming. No random crashes. The MOSFET briefly hit 40s compared to the higher 60s. This is under heavy workload. I couldn't be happier. I use a liquid cooler but this…

I used 2mm and 1mm spacers on the 5700xt. The storage temperature was reported to go up to 108°C, which didn't sit well with me. I washed the card with 90+% alcohol and replaced the old pads with these. Now stable on 68c HUGE improvement. 1.5mm seemed to fit, however being so soft I had no problem getting the GPU to the heatsink. A bigger brick than the others at the same price and with a claimed output of 12.8 kW/W. I was a bit skeptical at first, but the proof is in the temp drops. Gave me…