- Big, comfortable
- Started to creak very strongly after literally 3 days.
- In the first year of service there was a good chair.
- Short warranty period, poor assembly of the chair.
- A huge armchair for people who want to feel free. For tall uncles or little aunts, to climb straight with their feet and rest in it. High-quality performance, does not creak or squeak
- The armrests are a little short, sitting with the GamePad I want to support my elbows, but due to the fact that the armrests are not particularly long, this cannot be done, okay, the lateral support is large and the elbows hold well about it. Some may find it harsh
- All chips from the world of computer chairs are present in this model. Excellent build quality. Multiblock.
- The plastic covering the mechanism for lowering the backrest is of very poor quality and does not close it completely. Maybe a little hard seat.
- Let's start with the fact that this is a chair for big people. Specifically for large ones, and if you, being small, think that the larger the chair, the better, then you are deeply mistaken. Titan Pros: 1. The chair is really huge: wide back (62 cm), wide seat (due to smoothed lateral support). 2. Thick back, made in a "hugging" form. The thickness is somewhere in the region of 7-8 cm. Unfortunately, I did not feel this hugging back at all. This is not a minus. The reason is that I am small and the chair is huge. What is convenient for big people, for small ones will be inconvenient. 3. Filler at the seat. It's tough, but it doesn't feel tough at the same time. If Titan has a manufacturing date of the end of 2022, the beginning of 2022, then there will be very dense foam in the seat (that's what I'm writing about), similar to memory foam (as they wrote below), but it's not. There is no memory foam, but a very dense material. Memory foam feels different. I agree that over time this material will be pressed through and perhaps you will have a problem, like the Cougar Armor S (get a hole in the seat that is not going anywhere). 4. Reliable metal frame. It is immediately clear that the chair is made with the expectation of a large weight. There is no need to worry about the reliability of the metal here. This is where the pluses end.
- 1. The skin here is very similar to Cougar Armor S. And they write that it is better in Titan, it is super breathable there. It's all nonsense. Even in the photo you will not notice the difference in the skin between Armor S and Titan. And, most likely, it is the same there. Skin smells like chemicals. I will say that the Tesoro F750 has much better skin. She's nicer, she doesn't smell like the Titan smells. If we are talking about a black model, then this carbon-like edging around the edges is wrinkled well and most likely it will begin to crack over time. 2. Pillows. What is the lumbar, what is under the neck. They don't fit at all. They don't fit and don't fit a lot of people. The chair in the characteristics is for people from 160 to 200 cm. And I don’t understand at all how they designed this chair, since the pillow under the neck and for 160 cm is not suitable at all, and it is also not suitable for people from 175-180. Who are the pillows for? Unclear. If you put it on top, it pushes you out of the chair, and because of its unfortunate shape (even if you turn your ears to the top), it literally digs into your neck and head. Sitting with a neck pillow is impossible. 2.1. The filler at the lumbar pillow is a complete nightmare. Looks like furniture foam. It seemed to me that this lumbar pillow on Titan is also thin, under weight it will quickly lose its shape over time. Filler at the neck - cotton wool The F750 has a lumbar cushion filled with memory foam, which is very pleasant to touch. The neck pillow of the F750 is no less pleasant, although it is stuffed with cotton. You ask, well, if without pillows. And I will answer you, Titan has a deeper back and, in addition, this back, due to the peculiarity of its forms, pushes your head forward, while your back itself falls back. You can forget about posture. The lumbar pillow does not correct the situation. 3. It makes no sense to write about the backlash of the armrests. He is there.
- 1) The quality of the gas lift, cross, finishing materials, filler - does not play, does not break, does not remember dents over time. 2) Claimed weight bearing 3) Adjusting the stretching rebound spring over time - really works. It is possible to tighten it up in a year and the reclining will be with rigidity as on the first day. I don’t know what resource is there, but so far it hasn’t failed 4) Armrests with a large number of degrees of freedom, but not out of order! I expected them to finish first. 5) Gel wheels from aliexpress are suitable (like on roller skates) - they do not make noise and do not wipe the laminate.
- The receiving frame of the seat, namely the lamellas to which the base of the lower supporting frame is attached, are badly made. There are essentially only three guide lamellas - two thin ones (front and rear), which are fixed only on the sides and an additional pair of knitting needles! The front spokes burst, the fastening of the front lamella burst on one side. In fact, everything rests on the central wider lamella (the armrests are also attached to it), which is also attached to the sides, but there is less load on it when reclining in the chair. Further, upon examination, it turned out that both thin lamellas were already very strongly deformed - the back one arches away from the seat, the front one, on the contrary, towards it. See photo. At first I thought that in addition to the lamellas in the very body of the seat there is some kind of rigid frame and the bolts just fell off (I would fill it with poxypol and drown it back), but there are no rigid structures there. My weight is 105 kg, for a year I very often sat on a chair leaning back.
- Strong - metal almost everywhere; Ergonomics - many settings; Seat - on belt support; Materials - in general, there are no questions about the quality.
- Assembly - in the place where the cartridge enters the crosspiece, a creak began (apparently from the friction of metal on metal). All together, the same droplet creaks and taps if you move in the chair: the eco-leather rubs, the hinges tighten under the weight, the armrests dangle . I weigh 135 kg. Armrests - in fact, loosened for a quarter, and in general I'm not a fan. The soft touch seemed cool at first, but now I'm allergic to it and have red marks on my forearms.
- Durability, flexibility in customization. (a nice bonus; gloves for assembly (or going to the store in the realities of quarantine))
- I got what I was waiting for, I don’t like it a little that it’s not completely black, the black version)) that’s such a bad luck
- Very cool and high-quality chair, the mechanism feels like it can withstand an elephant. Comfortable armrests. Quiet wheels. The thing looks expensive and stylish. The reclining mechanism works perfectly, for example, lying in front of a TV set with a gamepad is very convenient.
- Pillows are not for everyone, but again they are there - you want to use it, you want it - no. The gas lift in the lowest position is at a fairly high level, at the highest position, with a height of 190, my legs barely reach the floor, I would like it to go lower.