💯 GB Remanufacturing 833-22105-6 Fuel Injector: Enhanced Performance and Top Quality Review

Tried to install this part but found injector #5 not working. To make matters worse when I tried to remove it 3 injector tubes in the intake came loose and wouldn't come loose. I had to gradually pick out the plastic pieces to pull the nozzle tubes out of the intake manifold. I bought Nereman locally, installed it and it worked like clockwork.

When I received the block the pipes were sticking out like bird wings. Once installed, they must be pulled back so that they face the front of the engine to allow the block to fit in the bracket. When I tried to twist the injection hoses into position it looked like I was going to snap the hoses. I called tech support and they told me to get them in position. After the engine was assembled and started, cylinder #3 was dead. All checks showed that the problem was in the #3 jet. I don't know if…

I installed one of these on my 2003 S-10 ZR2. For some reason 4WD trucks are hard to come by (or at least not for my truck). You won't find these things new or in the big parts stores anymore, only refurbished ones like these, only online. I didn't notice any difference from the original that I removed. Exact copy. I disconnected each injector's coils and they were all very close to the same reading for each injector. Let me warn you and give you some installation advice: do not attempt to…

My 2003 blazer started to malfunction and the check engine light started blinking, the code was wrong. Fire on cylinder 3. I took it to a family friend who owns a garage to run diagnostics on the truck and he said he thought it was a fuel cross or a clogged injector on the fuel cross. I looked around and found the best deal here on Amazon with free shipping for Amazon Prime 2 days! I ordered a Bostech CP102-6, I spent 3 hours installing it, there were no jets at the end of the hose like my…

UPDATE 12/23/14: Mine worked fine for about a year before I started misfiring on cylinder #4. I received an OBD code p0304 (cylinder 4 misfire) but confirmed that I had fired that cylinder. Then I discovered that this cylinder was not receiving any fuel. This was all confirmed when I finally pulled out the spider injector and checked the leads with an ohmmeter. Number 4 had no passage, so those jets didn't last. And the warranty is only for one year. I feel bad, so sad for me. As I mentioned in