🔌 GLOTRENDS 2-Bay M.2 SSD to USB C Adapter Enclosure for NVME SSD (Key M) and SATA SSD (Key B/B+M), Stylish Black Aluminum Case (Pisces) Review

This is the only one of its kind I've found on Revain that supports a Sata and an Nvme SSD simultaneously with USB 3.1 data transfer. The case consists of a solid block of aluminum, which also serves as a heat sink for the SSDs. They can get very hot when reading and writing fast. The included silicone thermal pads ensure good heat transfer to prevent SSD overheating and read/write errors. I really like it and use it to increase the capacity of my Acer Predator Triton 500 laptop.

The item arrived without all the required screws. I have to dig out my existing casing to fit this new casing. Also, the included cable seems to be sticky. This usually means it has been stored for a long time and in a hot place. Eventually, my system couldn't see the SSD with the cable that came with it, so I ended up having to use my own cable. I have rarely rated a product so poorly, but for this price I would expect it to come with all the necessary accessories and a higher quality cable.

This product has 2 USB-C cards, one for the NVME drive and one for the SATA drive, with a large heat sink. 2 USB cables, one for each drive. For this price you can buy 2 separate boxes, one for SATA and one for NVME instead of a bulky box that requires two cables. I bought this product so that I can transfer data from one type of data carrier. to another (or duplicate discs if necessary). I was hoping the connection inside would be smart and wouldn't use a tiny screw to connect the drive to the

Case is fine, but there aren't enough screws to fit the drive into the case. I bought one of these cases and it was missing 2 screws. I bought a second case and it only had 4 screws. It hurts not to have the necessary screws to install the drives in the case. It's just poor quality control. Also, the case manufacturer had to install NVME boards on both sides of the case. I ended up buying this https://www.amazon.com/gp/product/B07F5XPNVW/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&psc=1 and…

I've recently built 2 desktops and am reevaluating my use of M.2 drives. In the end I was left with SATA M.2 and NVRM PCIe M.2. This case is just for that. One of each! The installation is quite easy. It only requires handling small screws. Take your time and you will succeed. At first I didn't understand which side I was plugging the laptop into, but then I noticed the key fob hole as a guide. There are 2 USB-C ports on the case. So you can connect both SSDs via 2 USB ports. The box comes with

I'm still learning the nuances of NVMe SSDs and the variety of cards and enclosures available, but I've bought 4 GLOTRENDS Scorpio and 4 2-bay Pisces Guards. I use Samsung 970 EVO PCIe (2TB) and Samsung 970 EVO Plus PCIe (1TB) cards. What I really need is a dual chassis that is bus powered, supports RAID, and can be loaded with a couple of 2TB cards. for 4TB of shared storage. Although the Pisces model allows for 2 cards, I should have read the description more carefully. One card must be M.2…