🚲 GOLDEAL TOOPRE Bicycle Fork Star Nut Setting Installer with Free Spare Special Screw and Free Start Nut for 7/8", 1", 1-1/8" Fork Sizes: The Complete Package for Precision Installation Review

I have always followed the installation of the claw nut with a screw and hammer and everything has worked well. With this tool, the claw nut enters accurately, straight and to the correct depth. every time At this price, even if you use it very infrequently, this is a good tool to have in the toolbox.

I used this to replace a torx nut in my Fox 36 fork that I overtightened (user error, manual says 3-5Nm and I got it exaggerated). It fitted perfectly without removing the fork from my bike (although I used a hammer as I didn't have a rubber mallet) then this time I tightened the headset properly. :)

never installed a claw. I had to replace my old shocks and have seen many videos online warning about screwing the nut crooked or too deep without a tool. I bought this tool and installed the nut in 10 seconds! Straightforward and perfect depth! No need to spend big bucks on big names, this tool works great at a great price! Very satisfied!

With this tool, mounting the claw has been made much easier and, above all, perfectly straight. The tool makes a solid and well-made impression. It also came with a claw that fits a 1 1/8" steerer tube. I have a full video on YT. Please note that I purchased this tool myself and have no relationship with the seller or manufacturer. This is a honest review. what i think is a really good tool.

Used this last week to fit a starter into a pair of factory Fox 36 forks. I was nervous as the forks are expensive but you really can't go wrong with this tool. Depth. Since I was nervous, I started with a few light strokes. I found I had to pound it in a lot harder than I expected. If you don't install star nuts every week, get this tool. Despite the price, it's incredibly well made.

This is a good tool for installing the star nut. Mainly because the torx nut is tightly bolted to the tool, this keeps the torx nut centered so the lugs that flex are even and the torx nut is centered on the steerer tube. Another brand has a smooth shank that simply fits into the threads of the claw nut, so the claw nut is not held securely during installation. This brand is not suitable for use. This make/model works well, you don't want to ruin the steerer tube in your expensive fork, always…

Bent aluminum inserts for 1/4" threaded studs and included star nut Admittedly, the fork in question was a VERY tight fit with an inside diameter smaller than a average 1 1/8 head tube. However, it was almost impossible to tell if the nut was properly tightened until the tool was removed to locate the failed bolt. It would probably be good if they included a steel bolt with a matching thread , otherwise you risk uneven load on the steering column Installation or even damage the connector.

Does what it says on the tin and is perfect for a private label random number generator direct from Guangdong. The bushing thread material and ID leaves a lot to be desired as it can be difficult to get the threads out once the star nut is driven in and the star nuts are a little off track, but I've made 18 star nuts with it and not even one is one Broken threaded rod or nut did not go far enough to mate with top cap. However, an unexpected bonus is that its loosening means I can use it to…