📺 OREI HD-202 2x2 HDMI 1.4V Matrix Switch/Splitter: Remote Control, PIP, MHL, 3D, 1080p, 4K x 2K Review

I used to have an old Orei 4x2 HDMI matrix that was perfect but eventually stopped working. I bought a new HDMI 6x2 matrix as a replacement and it barely works. It's very finicky and I often have to switch inputs multiple times to get the display to work. Sometimes the same input is correctly output to one output and not the other. The biggest problem comes from the input from my PS3. When I turn on the console, I often have to switch to a different input and then back again (often multiple…

I bought this because I have converted all my classic consoles to HDMI using a Rad2x cable that converts RGB to HDMI. With this matrix I could play my games at the time by sending the video output to the capture card, I thought so anyway. Although this switch is well designed, it has the problem that it accepts a non-HDCP signal and converts it to an HDCP signal. who screwed up with a capture card. I tested this on a Magewell Pro Capture HDMI and an Elgato HD60 S, which had serious issues with…

I was torn on which one to buy as there are many of these blocks at Revain that look the same with different marks on the case. Everyone had mixed reviews but this one seemed like a good gamble and it was. The block itself is small and sturdy, all LEDs are red and not too bright. The remote works and the ability to turn the unit on and off is a nice touch - I've had it for months now and have had the unit since the day to which I connected it, no longer touched. I am using a device to connect…

Cheaper matrix, easy to set up and supports different media protocols. A little clunky if you're adding another remote, but allows for more flexibility throughout the system and is easy to integrate into your turn-on routine. The device has a button for each output, so you can change modes without a controller. Associated with LG and Samsung. configuration used. If an input is already in use, adding another input to another output seems to take over a minute to "recognize" it and send it to the

I ended up returning the unit because it didn't work well for my dual monitor, multiple computer configuration. One issue is that it seems a bit finicky when trying to display both the HDMI and DVI input sources (with an HDMI adapter). When HDMI is on output A and DVI is on output B it seems to work most of the time, but it usually doesn't work when DVI input is on output A and HDMI input is on output B. But even in the first case B In this case it sometimes didn't work properly and I had to…

This switch was professionally adjusted by Magnolia. I have a PS3/PS4/Xbox One/Xbox 360/Hyperspin PC/Wii U connected to this switch. Everything was great for the first few days. However, after a week I noticed that the second channel would only stream PS3 and PS4 to the second monitor. Also, the Xbox stopped displaying on the second monitor entirely. I reset the switch and it worked again. After a few hours, however, it didn't show anything on the second monitor. The Xbox 360 then began…

When you don't need the remote control, do it. This works well as long as you don't need a remote control to get the job done. When I received it the remote control didn't work so I bought a new one. None of the buttons worked, none. So I contacted the manufacturer. A week later I had a new remote control. But that didn't work either. None of the buttons worked. So I emailed them again. This time they promised to test it before shipping. I received a second replacement (third remote) and to my…