🔧 HeliCoil 5543-10 M10 x 1.25 Metric Fine Thread Repair Kit for Enhanced SEO Review

Assembly nozzle too big for the handle and vice versa; the handle was pressed very hard against the mounting tip. Even after applying WD-40 it was very uncomfortable. I made three unsuccessful attempts to install the inserts before finally being able to install two of them.

Repaired a broken bolt in a Yamaha Jet Boat impeller housing with Helicoil. Judging by the reviews, it should be stronger than the original. Installation was pretty easy. Used a carbide tipped Dremel tool to remove the broken bolt. This was the hardest part of the repair. I re-drilled the hole and installed the spool. Installed a new screw. Did.

Used to attach two striped motor mount bolt holes to a 12 year old Acura. Relatively simple direction and procedure. The only problem will be with the depth. Needless to say, the second hole came out better than the first. I used this product in combination with Loctite as this area is subject to high levels of vibration. 5 months later he hasn't moved.

Used this to fix a crf450x rear brake and it worked like a champ. Easy and pretty quick if you take your time. I watched the installation video on YouTube to make sure I installed it correctly and it was a bit helpful to make the installation easier if you've never done it before. It saved a lot of money because I didn't have to take it to the store to have it repaired or replaced.

The inserts supplied were 15mm long. You can buy packs of different length inserts for around $10. This easily helped rethread my exhaust manifold. Restoring threads in aluminum was very easy. You have to be careful to keep the hole straight. The packaging shown says "made in the USA" but the faucet in my kit's packaging clearly says "made in China" if that matters to you.

Used to repair two striped engine mount bolt holes on a 12 year old Acura. Relatively simple direction and procedure. The only problem will be with the depth. Needless to say, the second hole came out better than the first. I used this product in combination with Loctite as this area is subject to high levels of vibration. 5 months later he hasn't moved.

Used this to fix a crf450x rear brake and it worked like a champ. Easy and pretty quick if you take your time. I watched the installation video on YouTube to make sure I installed it correctly and it was a bit helpful to make the installation easier if you've never done it before. It saved a lot of money because I didn't have to take it to the store to have it repaired or replaced.

The inserts in my kit were 15mm long. You can buy packs of different length inserts for around $10. This easily helped rethread my exhaust manifold. Restoring threads in aluminum was very easy. You have to be careful to keep the hole straight. The packaging shown says "Made in the USA" but the faucet in my kit's box clearly says "Made in China" in case that matters to you.