🔍 HFP-361-BUR Fuel Pump Strainer Regulator Replacement for Buell XB9 XB12 Lightning X1 Firebolt Ulysses XB9R XB12R Replaces P0166.K P0166K T0121.02A8 Review

Installed on a fully taped 2005 xb9sx after a thorough cleaning and caught fire immediately. I had an early pump and the regulator was perfect as was the pump pre-filter. Make sure you get new o-rings if needed and clean everything - fuel lines, rail, injectors, line filter, low fuel gauge. Do this job once and then right.

Includes everything you need to replace the fuel pump. I ordered a fuel pressure regulator but didn't want it as it was included. Oh, it's good to have supplies. It's on buell xb9sx.Update. Just installed today. This fuel pump is strong! Huge difference from the older one in my Buella. All I had to do was go to a hydration shop to get 3 inch o-rings for the fuel pump housing. Highly recommend for Buella.

So the pump appears to be working, hopefully for a long time as it was a bit difficult to replace. If you use it to order an extra gas hose you will need it, there is only one in this kit. Also, they only list the size of the female wing connectors, and the pump has both small and large male connectors (there's a lot of interference when trying to get those stupid wing connectors to slide on the pump, that's a problem ) you may need to bend them a bit. Also be careful with the fuel pressure…

This is a good kit. It came quickly. The fuel line that came with it was 1.5 inches longer than the original, so I reused the original. However, if you're past all that headache of removing that pump from the bike, know that there are 2 large o-rings. must be exchanged. This kit does not include them. These o-rings are 3" ID and 3/16" thick (part number p0121.02a8). Find them and buy them when you order your pump. The kit includes all the o-rings for the pump itself. No one wants to have their…