🛠️ 2-Inch Suspension Lift Kit HLK300-00 for Honda TRX300FW 92-97 by Highlifter Review

Suitable after some sanding. The spacers weren't big enough. Equipment is cheap. I ended up just using the rear kit and buying longer shocks for the front of my bike.

Good product. Had to do some sanding to mount the front hardware but very easy to install. It's more like going up 1-1.5 inches. When driving the quad, I hardly felt any change.

This was a basic lift kit but the holes on each shock mount did not match. Quick fix with a carbide bur on a grinder. I had the kit installed in under an hour. The included instructions force you to take more steps than are required for installation.

An absolute difficulty to install. Spend 2.5 hours installing a bracket, bending, sanding, too much work to go up 1 inch. Thinking I was missing something, I took the other brackets I had and measured the bracket holes face to face, not even a full inch. It's not worth the effort at all.

mounting it on a 94 trx300fw, it took a bit of grinding to fit on the left hand side but other than that the installation was very easy. The instructions could use some work, although they didn't really help much. My Honda is on 26 inch tires so I don't really need them. I just like being able to sit high and articulate without chafing the fender brace

I have 4 bikes with elevators. The one they sent wasn't the one in this photo or mine. The holes were misaligned and needed fixing, and the mounting bracket on the back was clearly mismatched. My other two foreman lifts were fine, as were my rancher and my two former scout lifts, but unfortunately this one was misused. And it took forever. The highlifter is great, but it must be a ghetto sweatshop fake.