🔧 10-Pack of Heavy Duty Shelf L Brackets - HOME MASTER HARDWARE 12"x8" Shelf Support Corner Brace Joint, Right Angle Bracket in Black with Screws Review

I bought these for my children's room as a desk. These are perfect for her. They came with screws and anchors but I didn't use them. I will also use them as shelves in my garage.

These were strong braces of the highest quality. I've installed them every 30 inches in the garage and put over 300 pounds of tile and paint on them and they haven't fallen off. They come with strong long screws for the wall and small screws for attaching the wooden shelves to the brackets. We wanted them to be white. They are half the price of HD or Lowe. I don't eat clearly.

I use these brackets in the basement where I can attach the shelf supports directly to the studs. I checked the size of the hole on the bolt that was cut. I found the 7/32 drill bit made the hole that was the best and easiest to machine. I use supports in both directions to combine wider and smaller shelves. When screwing the shorter bracket to the wall, I used a 90 degree Phillips screwdriver to get at the center holes. If I had a ratchet screwdriver things would be a lot easier, but it would…

These mounts can't be beat for the price. I have 3 of these that hold a 4' x 8'3/4" particle board and they are great in my garage. The included hardware is perfect for my needs (about 150 pounds per shelf). I love it that the brackets have inline holes for the screws/bolts that go into the wall frame and the smaller screws that are included hold up well on the shelf, in my area and loosely more than twice as strong.

I have this shed. The barn is full of things. Many of these things are very difficult. They are so heavy that shelves of cheap plastic crates sag and lean. I wanted to attach the shelves to the wall. I was considering building a large shelving system with a frame but figured it would take too much wood. Then I realized I could use shelf brackets. I also realized that knowing how big all my heavy stuff is, I don't need an adjustment. That's where these kids come to the rescue. Big and strong…

Conclusion: Pre-drill the holes and get a drill extension and you'll be spot on. I've wanted a library nook in our living room for a long time, but even with the cost of the cheapest MDF shelving it's going to be expensive. Not to mention that MDF doesn't last long on some of our heaviest books. These brackets made the cost of a DIY project more manageable (and the quality made our shelves sturdier than anything we could buy). We took pine boards 1 by 12 by 6 feet and painted them. We used…

After a year of research and deliberation, I've learned pretty much everything about prices, colors, styles, etc. for wall mounts and hardware. For me it's perfect. 10 durable black high quality attractive and easy to assemble chassis supports. Couldn't be happier. To my surprise, thick solid wall screws with long threads and small board screws. First I used a drill to make it easier to install the screws. A drill as thick as a screw but not as wide as a thread. I wasn't sure if they would hold