🔥 INEFIL ER70S-6 0.030-Inch 10-Pound Spool Carbon Steel MIG Solid Welding Wire Review

This wire is Shiznite. The Sime reviewers don't like it for sheet metal, so it struck me that I don't know if you use .030 on sheet metal or if you just checked .030. But in my experience with automotive sheet metal, use the smallest wire you can use and 75/25 with the adjuster set on a high setting (25-35 pounds). I'm running this INEFIL at 0.023 with this setup and it's amazing. I use .030 on thick mild steel and it's amazing.

At first I was a bit skeptical about this solid MIG wire as I wasn't familiar with the brand. As other reviewers have pointed out, it gives welds a more attractive look, both in terms of color and "texture". It's hard to explain, but you'll notice it once you start using it for welding. Buying a 10lb reel is always cheaper in the long run. Even as a hobbyist at the weekend, it's amazing to see how quickly the welding wire goes through. Small coils really don't last long.

Loaded this wire into my Esab EMP215 (75/25 gas) a few weeks ago and was immediately impressed with the improvement in weld quality. This wire ensures consistently smooth and clean welds with high penetration. So far I have mainly been welding 1/4" and 1/8" diameter steel and am very happy with the quality of this product. It was only a few dollars more than Chinese alternatives, so it's great value too. I will definitely buy this wire as soon as the need arises.

With MIG wire for body repair, INEFIL welds very well. Smooth roll and good penetration as expected with the right settings. Plug welding has also been very successful so far. INEFIL's reputation is held in high esteem and I understand why. I paid a little more for this than a local, but it appears to be a better quality cable. Would I buy again for my welder. Haven't tried anything thicker than 1/8" yet, but I've used this on boards up to 20 gauge with no problems. As always with properly…

This is a good wire. I have been selling welding wire for 35 years. All major brands from the early days before .030" size. Wire arrived in good condition. No rust. Not twisted to affect wire feed. Shipping. Spool was in good condition. Wire has a light copper plating that prevents rust but also won't flake and clog liners and grommets like a heavier copper plating will.The ER70S-6 rating means it contains components that allow it to flow well and to weld some dirtier steel, resulting in a nice

I was extremely skeptical when I ordered this wire. Almost half the price of competitor cables, I expected below average performance. I was pleasantly surprised when I switched to it. I ran out of wire in the middle of a welding project (mine is a Miller Multimatic 215 which runs on 220v). I switched from my Hobart .030 wire to this Inefil wire. I was shocked at the quality of the welding. This wire lays much more evenly than Hobart wire, with much less spatter. It was a pleasure to run…

I have bought several spools of this wire and I am very satisfied. Have used many brands over the years and only seen them deteriorate over time when corners are trimmed. The wire is evenly wound on the spool, so it feeds smoothly and without jerking. No feeding problems due to different wire diameters. This has been a problem for cheaper brands - don't buy them! For the price they sell this inefil wire for, I was concerned when I first bought it that it might be a cheap brand that wouldn't eat