💻 Intel Core i5-12600K 10-Core Desktop Processor, Unlocked, 4.9 GHz, LGA1700, 600 Series Chipset, 125W Review

Cooled by a relatively inexpensive ID-COOLING SE-207-XT cooler (2900r), heats up to 60° in games, up to 80° in 100% load, MX 4 paste.

My copy from alik, bought at the end of autumn for 15k (although then it didn’t cost 14k for long), keeps overclocking 5400-5500 for fast cores and 4200 for energy efficient ones without any problems. The bios rating shows sp 81 on an Asus prime z690-a motherboard. Cooling deepcool ak620 wh +5pcs. case blowers-blowers with auto-regulation of speeds. In stress tests, it can heat up to 90 degrees, in everyday tasks it practically does not have a maximum load, and accordingly, it does not reach…

Initially, I planned to take 13600k to the Asus prime z690-a motherboard, but I read reviews that the 13th series processors on many motherboards do not start out of the box due to the need to ate the BIOS. I decided that I would not run around with a new motherboard and look for a programmer and began to look towards 12600k. In the BIOS, I overclocked the percentage with a couple of mouse clicks, without load it keeps 28 degrees under dropsy, under a long load it was not possible to load more…

I have a 2070 strix from asus. Before that, it was 12100f, well, it was rather weak, especially for modeling and playing Rust, it didn’t pull out, even in Detroit in many scenes it hit a hundred, and the card chilled at the same time. But as soon as I installed 12600, everything worked as it should, now both the models and the editor are quickly imported and the finally doesn’t freeze, even Detroit tested it today, I didn’t see a CPU load of 100 in any scene. I am silent about a hat such as…

Good 12th gen processor. Taking into account the price for 13600K - the best in terms of price-quality ratio. Yes, it heats up less. It is worth taking at a price in the region of -16-18 The current price of 21+ is too much for him. Has some pros: Works fast, cold. It eats less analogues from AMD and heats up less. Cons: Need a mother with a z chipset and good power phases. You will have to install Windows 11, 10k with E-cores does not work correctly.

The processor is quite consistent with the average gaming PC, overclocking for enthusiasts and decent performance for gamers, the only negative (in my subjective opinion) is no video core, but the price is in order)

I inserted it into the mother on the Z690 chipset, overclocked P-cores to 5.1 GHz, E-cores to 4.0 GHz, TDP 150 W, 1.23 V. I took it for games and work tasks, switched to 1700 socket after zeon on 2022-v3 , I noticed a difference, but not much)

I put on Asus TUF Gaming B660, Deepcool Gammaxx 400 EX cooler + 4 valves in the case, there was no throttling on stress tests. An excellent choice for its price range.

Everything is great, fast and cold enough! In games, I have not seen more than 45 degrees, while the temperature of the video card is 75! 😬

Proc has not yet driven, but on the motherboard ASRock steel legend / D5 can be overclocked. Temps around 40-45 with MX-4 thermal paste and a 120mm 180W cooler. Perhaps due to the skew of the 1700 socket, cooling is not so effective, I think to change the native clip to an aluminum frame

Excellent seller, sent the box version instead of the oem version. The parcel came in 6 days from Hong Kong to Hong Kong. The seller responded promptly to any questions. )

Great performance for your money. After switching from 9600KF, I was surprised how everything can fly. Under a two-section dropsy (be-quiet), the percent does not heat up and does not throttle (without overclocking). I recommend to buy. Has some pros: Not the hottest, but quite productive processor in the line. There is a possibility of full overclocking Got cons: Again I had to buy a new motherboard (thanks to Intel for this).

In general, an excellent percentage, I’m not exactly an expert in pieces of iron, but I know the basic things and wrote what I know) Has pros: An excellent processor, I will immediately write about lovers of frames for socket 1700, this is all nonsense. I inserted the CPU, clamped it with a regular frame, took a steel ruler, attached it to the processor, shone a flashlight from the other side at different angles and not a single gap, maybe this is the merit of the motherboard, but I don’t think

I took it in June 22, I’m happy with everything, except for the price of the mother, the operative and it has fallen in price, for 15k I took a 2 * 16 GB kit for 5200 in stock, I clocked up to 6000 with good timings. There is an average-budget cooler, although the case is well ventilated, I have not seen more than 65-70 degrees in games and work. In idle time, when I look at kinchiki - 40-42. Who does he boil there? What are you doing with it?!

Got pros: Top percent, new cores, easily takes 5.2 GHz and 4.1 for small ones. Support ddr5. Cons below: the price at the beginning of spring, cost from 40k, right now it’s already 25k.

I had to try to find adapters for installing the VSO. Not all manufacturers have yet released cooling for our market for this socket, so the choice is limited.

I'm only giving 2 stars because of the poor delivery. Made express delivery. There are no complaints about speed. They brought me an EXPENSIVE processor in a box from under the COOLER (at first I thought that they brought me a stupid cooler, I almost had a nervous breakdown), they put the naked processor in a bag, covered it with a special “sponge” for protection, or as it is called and tightly secured with a rubber band in the center. Are you crazy? What if the processor is damaged? There was…