🚗 Enhance Your Vehicle's Seating Comfort with Invictus Universal Seat Slider Track Set for Aftermarket Seats Review

The seat and mount I paired these glides with wasn't a good combination but I got them to work. I installed them on NRG type r seats. The sliders rotate a little once pressed against the seats, just enough to make sliding almost impossible. But they are exactly as advertised.

This is a joke. For real. How versatile can it be when it's too tight to accommodate nrg or sparco. . . It's not even wide enough for most bottom-mount seats, which are also about 13.5 inches apart. The adjustment bar is a limitation of the distance between the rails. Nothing works without the adjustment bar.

left and right had 2 separate positions, one moved forward about 1 inch, the other further back. When I tried installing both of them flush to each other, they were almost 1/4 inch misaligned. This limited my range of motion by about 2 inches. I can only come back about 1 inch when bolted directly to the floor. and forward about 2 inches. In addition, everything is twisted as tightly as possible, the bolts do not move. the sliders themselves have play, so the seat wobbles.

For SIM drivers who want an alternative to the stock Playseat mounts, this option works with a slight modification. Revain didn't send an OEM mount to HI so I had to do it. You will need to modify the cross member by widening and bending the attachment points so they are exactly on either side of the bracket tabs. I bent the stem and adjusted it in small increments to avoid damage. After getting an acceptable fit I was able to secure everything and it works great and now my little man can take…

Thing's as useful as hot trash. Tried using a Sparco to mount the seat and the lever would not engage the rails. It hits the seat and loosening the sliders is not enough. There's a bunch of grease on the inside of the slide bar, but it moves there like it's rough and rough. One of them was almost completely caught and hardly slipped. The slider was also a few inches thinner and I had to widen it to even fit the brackets. Overall I can't use it and only spent 45 minutes playing around with it…

The rails themselves work well enough and there was enough wiggle room in the multi-bolt arrangement to be able to mount them directly onto the dead base of the power seat that connects to a captain's chair made by Long Vans the Conversion company gone. so in my case there were no measurements and drilling, which is surprising and good. and a huge BUT. Obviously, the adjustment rod factory setting cannot take more than 2 minutes in a real application. I haven't even tried to use it. I…

I would like to leave 1 star but in fairness. He really slipped. It's just not very well done. The Sparco equivalent is $88, which is less than $40 including shipping, so I rolled the dice. I should not have done that. Literally arrived covered in grease. I had to hold it all down with a wedge so I wouldn't get covered with it. I also didn't want grease staining the cloth bottom of the seat. I understand it needs lubrication, but maybe just toss a packet of lube in the box? Attempting to…