JBA 1400S Shorty Stainless Exhaust Review

I had a cracked exhaust manifold on my Infiniti QX56 (a common problem with Armada and Infiniti) so I bought these to replace. well the item arrived but it was a bit more work than the store thought because they had to weld crampons to it which were supposed to come with some kind of flange or something. In any case. it works great and solved my problem.

Worked great on a Titan 06 with a cracked manifold. Car has 62000km and they crack. Anyway, about 7 hours of work from my shop. 4x4 is a real pain in the butt. Make sure the motor mounts are really tight. Mine came loose and started breaking. Just plugged it back in and all is good. The cards in the spokes don't sound anymore only factory cats cut the commutator and weld to the commutators instructions tell where to make the cut 900 total with fitment cheaper than 1300 per side for factory…

They work great, have welded some coils on them and gave my Titan 04 a nice deep tone. The only downside I see with this product is the need to remove the headers. Unless you have a welder to heat one side of each nut on the mounting bolts this can be a real problem and you risk removing the nuts. This probe can also be a real pain. If your OEM gaskets are still good, you can reuse them and save time re-tightening the nuts since they're already broken. I would still check them to be sure.

I had a cracked exhaust manifold on my Infiniti QX56 (a common problem with Armada and Infiniti) so I bought these to replace. well the item arrived but it was a bit more work than the store thought because they had to weld crampons to it which were supposed to come with some kind of flange or something. In any case. it works great and solved my problem.

Worked great on an '06 Titan with a cracked header. The car has 62000 km and they crack. Anyway, about 7 hours work from my shop. 4x4 really is a pain in the butt. Make sure the engine mounts are really tight. Mine came loose and started breaking. Just plugged it back in and all is well. The cards in the spokes no longer sound. Only factory cats cut off the collector and weld on the collectors. The instructions indicate where to make the incision. A total of 900 with installation. Cheaper than…

They work great, welded a few cats on them and gave my Titan 04 a nice lower tone. The only downside I see with this product is the need to remove the distributor. Unless you have a welder to heat one side of each nut on the mounting bolts this can be a real problem and you risk removing the nuts. This probe can also be a real pain. If your OEM gaskets are still good, you can reuse them and save time re-tightening the nuts since they're already broken. I would still check them to be sure.

California Air Resources Board Legal! My stock headers were cracked and had to be replaced. Dealer parts were overpriced because they are only sold with catalytic converters attached. Why should I change catalytic converters if they aren't the problem? Hire a professional to install these short JBAs (it will take a long time on Titan) and reuse your existing catalytic converters. You save money over replacement parts offered by factory dealers and improve the performance of your Titan. With the