🔋 Enhanced Performance: JOAUIAX Rechargeable Inclinometer for Construction and Woodworking Projects Review

would recommend to anyone who needs a voltmeter in a 12v dc system. I just hooked up +/- 12 volts to the thermostat and cut a small square in the case and it immediately stood up and looked like it came from the factory that way. lolCons: The only problem was that I thought it was a measurement box with a gasket or bracket, it's not, it has to be installed in some kind of box or plate, the back is completely open with very short wires. 22 ha. (and there was no adjusting screw like in the posted

I bought two of these to monitor my solar generator battery voltage. It offers a clear, bright display that lets me know (at a glance) the status of my system (battery controlled). It's very bright at night to the point where it can be over the top, but I like it. The one I bought uses a 2-wire configuration (i.e. no alternate source is required for this thing to work, just wire it to whatever you want to control). The panel mount configuration requires a rectangular hole, which I found…

I bought this one because the ones with 30 day delivery time didn't arrive and I spent 45 days waiting for the project so it was my second choice. You have to turn it on first to know what's up or down, so set it right so it can be read. It has large flanges so it is very easy to install during the cutting process. I used a pneumatic sheet metal cutter wheel. While the A-pillars that the wires go to are marked positive and negative, it took me two tries to figure out which side to plug them in…

I bought one of these to measure the voltage in my solar system and was disappointed because it wasn't accurate. I needed two more because I have several independent systems: one for the lighting, one for my computer and one for the internet. I bought two more of these because an inaccurate gauge is better than nothing! The two new ones were just as inaccurate and seemed impossible to calibrate. (No obvious potentiometer). Well I forgot to turn one off before disconnecting the battery while…

I read a review where the author of the review received a RioRand LCD panel digital voltmeter and found that his readings were inaccurate compared to his Fluke meter. The first thing I did when I got mine was test it with my meter. While not as high quality as the Fluke, it works well and I found that the two devices had almost identical readings (see image) when both were connected to my car battery (car not running). I bought mine while restoring a headlight. Installed in my '67 Camaro RS. I…

I don't know how many other reviews of this replacement product are accurate. Revain is currently (August 14) investigating what happened when reviews of one product were combined with another product. I would advise you to stick to more recent reviews to get the best rating for this actual product. The original product is no longer listed on Revain. Read this review if you really expect this voltmeter to give you accurate readings. This digital panel voltmeter (DPM) is model YB5135D…

I love this laser level. It's easy to understand and easy to use. 9 red laser beams on both sides and bright. You can turn to one side or the other or both. It's rechargeable, which is great. It comes with a new USB charging cable and a user manual. The device is very sensitive. With the slightest movement, the numbers on the digital display increase, but return to normal. The only thing that could improve it is a strong magnet. Unlike a magnetic viewfinder, its magnet is weak. If it could…

The device has an accuracy of about 0.1 degrees. I was able to compare this unit to two other digital levels on a flat, hard surface. All results differed within 0.1 degrees. The numbers are large and well lit with the ability to toggle from degrees to percent or mm/m. This saves arithmetic operations. The side output of the laser is very convenient for marking the drilling locations at some distance from the spirit level position. Unlike most similar devices, the battery is rechargeable and…

It's great. I recently moved in and I hang pictures and paintings on the wall, so of course my laser level and spirit level and I have become very good friends. This is the best of both worlds! It has a laser level so you can see across the room where some are level wall to wall - it also works as a digital level to let you know how level the surface is. Look at the fourth picture I uploaded. It shows the angle you are at so you know which way things are leaning. It's also useful when leveling…