High-Performance Jointer Planer Knives Blades 6-1/8-Inch for Ridgid JP0610, Delta 37-190 37-195, Craftsman 21705 922995, JET JJ-6CS, Powermatic Jointers - Set of 3 Review

3 blades 2 were the same size 2 were the same thickness and length but the width was larger. The end result was a longer blade, a deeper cut

I installed these on an old 5" Delta joint by following the alignment process outlined in the manual. Run the board through the machine and note that the edge is very smooth and straight on the sides. Worked great!

I bought these blades to replace the dull ones in my old Atlas 6 inch jointer. They are very beautiful, sharp and well made. My jointer is probably from the 1950's and parts are hard to come by. They should work well enough.

The only problem I had was a burr on the flat side of the blades which settled on my 2500 stone after about 30 seconds Correctly, it has no polish, but if you don't move the protective cover, you still won't see it. nice little plastic container covered in oil. Like I said, the ridge was the only real problem I had.

Product dimensions not listed. Just under 6 inches long. The height is just under 11/16 inches. The thickness is 1/8 inch. Extremely disappointed. Was pleased with the fast shipping but it doesn't matter if the item was sent to you with the wrong description. The length should be 6 1/8 inches as described and the height should be a full 11/16".