🔌 Legrand Home Office & Theater, Network Switch 12 Port, Platinum Grey AC1014: Enhanced Connectivity and Efficiency Review

Purchased to fit an existing Legrand wall box. Works perfectly. It would be nice if there were a few places on the back to use a zip tie so it doesn't strain the connectors when you flip it over to attach to the back of the box. Tail marker for T568A only. (Most IT pros prefer the T568B), so I had to rewire a few outlets around the house to use the "A" convention for consistency. I'm surprised they don't provide a T568B color code marker sticker that you can use if you prefer. Tool clamps are…

These interface modules are a perfect match for my On-Q cabinet and are perfect for connecting CAT5/6 cables. I especially like the little clips that cover the push pins to hold all the wires in place. The modules are easily and securely attached to the On-Q cabinet. Punching wire is tedious, but not very difficult. Note that the perforated racks are marked for the T-568A standard and can be a bit tricky if you need to adapt them for the T-568B. However, in general they work well and produce a…

I don't know if they changed their boxes at some point, but mine is 3-1/2" deep. Why is it important? add another 1/4" to the connector panel itself. This gives you 1-1/2" clearance for patch cords. RJ45 with a medium sized strain relief adds 1" when plugged in, leaving you 1/2" to basically bend the cable 90 degrees, which is doable is, but I don't like the resultant voltage on my solid 24 AWG Cat5e core unless you have a cap with a cutout to add an extra 3/4" or more - I don't see how this…