🔊 Premium Infiniti Sound System Compatible Double Din Dash Kit Aftermarket Radio Install for Jeep Liberty 2003-2007 Review

fundamentally wrong done had to order trimming with a heat gun repaint the screws etc. I would like a refund or an apology for the amount of work I had to do. the connector for the stereo was not properly mated, which is not ok, it should be a quick install. Not finished yet

This is a very bad product, firstly the size is not suitable for 2 din radio we had to cut the top and right side of the Cut holes, had to remove clips and put them on at the factory, external dimensions not exactly the same either, see pictures. This product could be a great product if they make some adjustments to it.

Double din radio didn't fit my 2005 Jeep Liberty. The edges are more rounded than we'd like and the slot is slightly smaller than the radio. I've tried grinding it down to size but that makes it pointless to buy an aftermarket double bevel. You can also cut the chamfer in stock.

Make sure you measure the head unit and be prepared to cut a bundle of material around the hole. I used a dremel to do this and it took ages because I didn't want to cut or scratch the areas. It goes well with the dash, the black doesn't go with the silver interior, but I bought a carbon fiber silver pattern vinyl sheet that I'm going to apply to this and other small areas in the car to give it a nice look. The straps that come with it are junk.

The RCA connectors on the wiring harness suck! Every time the belt moved the noise would break. I ended up connecting the wire harness and soldering the connectors. The bezel placed the radio too far back making it very difficult to touch the buttons on the bottom of my ATOTO A6 pro (Very very good stereo, I'm very impressed, it has everything! it, 4 USB front aux .,. ,.,.,.,.,., very well spent $240 on sale) I had to spend 20 minutes with a dremel tool, I also had to take this around the…

The RCA connectors on the wiring harness suck! Every time the belt moved the noise would break. I ended up connecting the wire harness and soldering the connectors. The bezel placed the radio too far back making it very difficult to touch the buttons on the bottom of my ATOTO A6 pro (Very very good stereo, I'm very impressed, it has everything! it, 4 USB front aux .,. ,.,.,.,.,., very well spent $240 on sale) I had to spend 20 minutes with a dremel tool, I also had to take this around the…

Fits great and looks good in Jeep and matches Sony xav-ax100 head unit. You will need to trim the dashboard plastic structure to fit the 2 din block. I also had to tinker with the emergency gear lock, it interfered with the upper part of the radio. However, that's not the fault of this kit. The wiring harness was almost connected to my head unit. Sony doesn't have RCA input jacks, but it's nice that the wiring harness offers them as an option. I had to cut them out and solder them directly to…

Bracket for installed Pioneer head unit was installed Although the hole allows for it, only a recessed head unit needs to be fitted. The antenna adapter works, although once installed it appears impossible to remove. The bad list is too long. There were absolutely no instructions included with the custom assembly of the Jeep Liberty Dash Bezel parts with premium wiring harness. It was completely devoid of printed material. Upon request, the instructions were sent via iPhone so they didn't show…