🛠️ Cabinet Knob/Pull Installation Template Guide - AN0251C-CL-U | Improved SEO Review

So I read a lot of reviews and almost didn't buy. Our grips were about 5 1/2" and people said it would only work with 5" or less. However, a review I read said it was 6 inches wide the entirety of it. So I thought why not. If it doesn't work I'll send it back. None of these reviews are telling you that your mounting holes should be no more than 5 inches apart. Your handles can be 10 inches long if the mounting holes are only 5 inches apart. The only downside to this is that the plastic appears…

I would recommend it for most handle or pull rigs. Make sure this template is suitable for your size pool. My templates were a little warped, but still worked fine. May not work for all installations in your exact installation location. If you need more flexibility with placement, consider getting a custom template instead. I held the template with a clamp and lightly marked it with a center stamp. This worked better than a fine-tipped pencil or marker because it left a small indentation to…

I didn't actually use the allocated holes because they didn't match my doors. The drawer worked great, you just need to measure the center of each drawer, then line up the center hole with that mark and choose the height you want, hit the marks with an awl, drill the holes and install the hardware. Did a quick job with my entire kitchen and everything worked out perfectly. I marked the holes I used with a red marker so I don't get confused or make a mistake as the product has so many holes it's