🍃 MaxTrac 411420 Leaf Spring Shackle Kit 2-inch Lowering Rear – Powder Coated Grey, Inclusive of Greasable Bushings/Sleeves – Premium Leaf Spring Upgrade Kit Review

I don't usually write reviews but I've seen in other reviews that the braces only sag an inch. So I was a bit upset that I had the same problem. I only have 1.5 inch change on either side. I have a 2015 Ford F-150 and it was quite a bit of work as I had to cut out part of the bed support and it wasn't easy to get the screws out. It is NOT worth working because it does not achieve the advertised result (drops 2 inches).

Working. Perfectly levels my 2019 F150. Ride quality, looks and handling have all improved. I removed the star because there were no instructions AND because the bottom bracket/bushings were VERY tight in the frame bracket. It took me a lot of unnecessary time and effort to install the bottom bracket. In hindsight, I should have sanded or sanded the frame mount to make assembly easier. Also make no mistake, you will need to cut off a 4-5 inch section of the bed frame support. I tried to avoid…

The bracket will ONLY work if modifications are made to the truck or shackle. The train is too long! It meets the bed support at its original length. You will either need to cut out part of the bed support or shorten the bracket. I decided to shorten the braces and drill new holes instead of cutting the bedpost. As a result, I only lowered the rear of the truck 1.5 inches instead of the advertised 2 inches. Also, to make installation easier, I cut off an inch of the top screw and pushed it back