Modifystreet For 05-09 Mustang GT500 Style Flush Mount Rear Trunk Spoiler Wing Review

Bought this for half the price of the one on American muscle due to always being out of stock. The finish was nice no imperfections came from California pretty fast. I installed myself with basic tools drill, bits and a screwdriver. The guides work fine but hard to get it perfect without a little guess but all in all I got it within a 1/8” of the trunk lines all left to right and even forward to back. Nothing noticeable, about 2 hours to install. The felt double stick bottom will help against…

Spoiler looks nice on the car and quality seems good. But the holes in the lid don't line up with what's on the spoiler. 2 were ok, one was slightly off and the third hole was completely off that I had to drill a new one in the lid. And this spoiler requires at least 2 more holes or better 4 drilled since it has 4 pairs. Once I did all that and installed the spoiler it looks cool. Way better than the factory flush one. I like raised spoilers and this is one of them. Overall for the price, this…

Didn’t want to drill into my trunkWorks great with the 2 bolts that match stock mounting points and a entire roll of 3M tape to hold it flush to the trunk. Hit 110 constantly and it was solid in my trunk

This product fit like absolute garbage and bends easily in heat, then the company is refusing to give my money back! Avoid!

I loved it. It gave a totally different look to my car. I wanted something different from the stock one and this satisfied me. Only bad thing is that it didn't come with double sided tape but i had one laying around that cost about $10 bucks at AutoZone. I had to drill two more holes por better grip.

Perfect fit and only had to drill the outer holes. Only thing is it didn't have directions, but YouTube it one search away

Pre drilled holes were not on correct position but made new drilled holes and screws and got it to fit. But overall good quality

seems to be a good product, but did notice NO instructions were included. I ordered for a custom application, so not an issue for me, but for the Mustang guys that have never done something like this before. not so great. wth?

I was suspicious about only spending 68 bucks on a spoiler that goes for $199 on American muscle, but after i got mine i was very impressed. I had it professionally painted and adhered it to my trunk lid with 2 of the supplied screws for the stock location of the pedal style spoiler and gorilla tape for the rest. its been on the car for 2 months now and I've gone 1XX mph plus with it on the trunk like this and no complaints.

Installation was pretty easy. I had to drill new holes for it though (does not fit holes of the GT spoiler), so make sure you get the measurements right before you drill. make sure to use gasket maker/RTV to seal the holes too, because the foam does not do a good job at sealing the water out. Other than that, it looks super nice, and is really easy to wrap and/or paint.

You don't really have to drill the 2 outer holes, if you have factory spoiler, those bolt holes line up perfect. Was a little difficult to get in place, so set aside a few hours to remove the old spoiler, clean the surface, and install the new one. Looks great, but it's hollow so it's kind of flimsy.

Revain described this would fit my boyfriends car, though it looked like it would when we try to install the spoiler the screws that came along are nowhere near long enough to reach the hole; and it sits on the car pretty weird not how you would think.