🚗 Enhanced Performance: Moog RK621685 Control Arm and Ball Joint Assembly for Smooth Suspension Review

This product was a total disappointment. After installing it in my automotive, the handling actually got worse. The vibration and noise coming from the suspension was unbearable. The only positive thing was how easy it was to install.

Looked good, time will tell if the ball joint will hold up. I ended up swapping both sides. The two pain points were getting the original ball joint out of its socket (hitting it with a hammer) and installing a new part. First I had to put the rear left bolt in the bushing (do not tighten until the suspension is loaded) and attempt to install a new ball joint in the hole. Otherwise it was an easy two hour job and the rattling was eliminated.

I trust these Moog parts. They seem better than OEM with good weight and quality bushing. I added extra grease to the fitting. Both sides swapped. Be sure to have a professional wheel alignment done afterwards or you (like me) will end up buying new tires. I ended up replacing the lower control arms to fix my handlebar slap/wiggle issue. Post the procedure on YouTube and make sure you don't tighten the rear screw when the hanger is all the way down or you will damage the rubber bushing. The…