🔧 3/8"-24 Brake Line Fittings Kit - MuHize Assortment of 15 Pieces for 3/16" Brake Line Tube (Includes 5 Unions and 10 Nuts) Review

This was my worst Revain order. The debris goes no more than half a turn. Go to your local parts store if you have a good one, the Revain is really bad.

Unfortunately the threads on the fitting did not match the threads on the other parts making them unfit for sale - luckily I had parts from a previous job that matched the fittings , so I was able to complete my brake repair with it.

Looks good but is useless due to poor quality control. The thread pattern is not compatible, so the nut and fitting cannot be tightened. This renders them useless as they need to be sealed to prevent brake fluid leakage.

I used these to fix a small leak in a 3/16 inch steel brake line. The rust caused a small hole so I cut out the bad area and used a standard flare tool to flare out the cut areas. These connectors worked well to connect them together. There are no more leaks.

After reading some reviews about the nuts not screwing properly into the nipples I saw that there was free return, so i decided to take a chance because the price for 5 full alliances was ridiculously low. The package I received contained 5 fittings and 10 nuts. All 10 nuts are properly threaded into the fittings and properly seated in the sockets of the torch. The fit and finish appear to be good and I'm really confident that they will work well once I have them installed. If not I will update

I have just finished installing on a section of brake line that I needed to replace on my 1995 Civic Si. The first time I tried tightening the connector on the brake line nut, the connection broke and an airtight seal did not form. I got lucky and replaced the nipple with a new nipple (and the same brake line nut) and this time I didn't tighten it as much - just a little tightening - and it held a good seal throughout my brake bleed process. I have yet to test how the compound holds up after…