Muzata 10PCS Railing Stainless Marine Review

These self-tapping screws perfectly match our deck with 1/4 cable. A drill came to make a hole for the cable. Use a smaller drill to drill holes for the screws. It was a great purchase.

Perfect fit for our conditions. I bought hydraulic pliers ($40 each), wire cutters ($10), screws and wire. Ease of installation. Measuring was a pain to make sure everything was even. I like the result. Modern and clean with an unobstructed view of our pool.

The description does not indicate that the ferrules have right hand or left hand threads. Picture 10 led me to believe that 5 was right and 5 was left. For my application, half should be on the right and half on the left. Upon arrival all 10 were found to be right hand threads. As a result, I had twice as many right-hand dies when I did NOT need left-hand threads. Was delayed for several weeks while waiting for delivery of the left hand thread which I subsequently ordered. Correct the…

Torque Screws have 2 flats that fit a 5/32 inch wrench. My Sears Craftsman 5/32" wrench broke when I started tightening the cable, leaving me with an adjustable wrench or screw clamps or channel locks. The downside to the design is that the flats are not wide enough for small adjustable vise or channel locks. By the time I had them all tightened, the screws were actually scarred. If you use the recommended tightening sequence, you may only end up tightening a quarter turn at a time. This makes…

Seen many installations on You-tube without understanding why some products are so expensive. With the exception of the cutting tool, Muzata's products were as advertised, easy to install and the best price for this type of product. The hydraulic crimping machine is a high quality and easy to use product. The cutter worked well for 15-18 cuts and then started making poor cuts making insertion into the fitting difficult but doable. Maybe just a lemon, like other high quality products. I've never

Looks good so far, but I haven't installed it yet. If this is your first time using this there are some helpful videos on You Tube of people installing them with this exact brand of 1/8" steel cable that I will be using and this manual crimping tool that I am also getting. So it's a small package so I can "test" it before I decide to invest in a whole bunch of them. It's not clear if this is harder than it appears on TV or if it's a do-it-yourself job for those used to tool handling. I was…

Muzata has some great products, but you really need to learn what works best. So here's my project and advice: a tall fence in my backyard that will separate my orchard and raised beds from the pool and patio without interfering with line of sight. I went with 3/16 inch stainless steel braided cable and visible tensioners. for CC cables and fittings NEED: Purchase a Muzata CT01 cutter (yellow handle) - a clean cut on the cable is absolutely essential. TO DO: Make a template for drilling the…