Noctua NH-D15S Dual-Tower CPU Cooler with NF-A15 PWM Fan - Premium Brown Edition Review

In general, I am satisfied with the purchase, it cools the i9-9900, in idle time 30 degrees, in the AIDA64 stress test after 15 minutes the temperature did not rise above 60 degrees (I didn’t test it longer, but the games will show more real results). I didn't install a second fan. In theory, if the case is looser than a simple ATX (I don’t remember what they are called correctly), then you can install it directly without removing the motherboard, provided that there is a rectangular hole at…

Took on 3700X. Normally, nothing seems to cool this percentage, but in comparison with the budget Arctic Freezer 34 CO - heaven and earth. The installation of the second valve immediately gave a minus of about 5 degrees while reducing noise, since both are now spinning more slowly than one before. Namely, at 100% load of 6 cores and the temperature inside the case is 28-30 degrees, the temperature of the cores is stable at 74-75 degrees (loading all the cores adds a degree somewhere). This is…

More impressive than the RTX30 series graphics card. Packed very securely. When you start unpacking, you feel what you paid for. Everything is arranged in boxes, everything is in its place. The kit includes everything you need and more. The instruction is clear, there is a video instruction on the site. There are mounts for all possible options. Installation is not difficult. I was afraid that the cooler would not fit into the case, the maximum length of the case is 161 mm. But the cooler fit…

The brand is justifiably considered one of the leaders in the segment, a quality item. What did I compare with at the time of purchase: I had Thermalright Le GRAND MACHO RT standing on the same stone in the same overclock (the only thermal paste was Grizzly cryonate), and so, the hunchbacked base infuriated me in it (even though it seems to be a tight clamp, but with effort, it is possible to turn the radiator tightly screwed in my opinion along the vertical axis, which cannot be said about…

Perfectly cools with 1 fan i7 5960X 4.0/4.4 GHz (core/cache) As I compare with competitors, I will add if I forgot something. I bought a full set for 3 from my hands in perfect condition, I replaced the turntable with a new one, just in case.

In general, I am satisfied with the purchase, it beats its price, but it could have been cheaper. I threw a 120mm fan in front (140 will not work because the RAM with high radiators)

To begin with, this is, in fact, the only adequate air cooling model for the Intel Core i7 12700K LGA1700. This processor heats up a lot under load and the choice is either CBO, or it will overheat and troll if you save on the cooler. At first I chose a two-fan NH-D15 (without S), but it has a height of 165mm (the side glass would not close in my case), and this one has 160mm, it went in exactly, even a small tolerance was still left. In the kit it’s good that there is a regular and convenient…

It’s not a fact that dropsy for that kind of money will be better, but the installation hassle is definitely less. And no noise from work. The result is a productive cooling system (it copes with an overclocked i5-10600K up to 5 GHz on all cores) while remaining quite quiet even at maximum speeds.

Was taken under i7 and AsRock Extreem Z390. In the reviews on the motherboard, I found that the NH-D15 without the S index interferes with the normal installation of extreme memory sticks. That's why I decided to take this model. Has pros: Solves the problem with the space for memory dies. They don't interfere at all. Got cons: One fan, but the second can be delivered. Fasteners for the second one are included. The real downside is the price. Yes, when installing the tower itself, you really…

7700k was with a cooler master 212 evo, the temperature flickered to 80-90 gr. Before changing the processor, let me think I will change the cool. And prifigel, in the metro remaster, the outcome is 65 degrees at extreme settings with rays and dlss at 3440x1440 21: 9, the current tessellation turned off - fps 78 (tessellation ate 20 frames). I turned on the optimal mode in the BIOS - acceleration up to 4.8 GHz - temperature 75! But the fps didn’t add a single gram, it returned to stock, it…

With its pros. Convenient installation, noiselessness, memory does not interfere, a long distance to the video card (thanks to the asymmetric design), complete set. With its cons. Not every body will accept it, the dimensions are impressive.

The i5 11400 cools almost in a passive mode. The fan does not spin above 650 rpm in the internet and does not spin at all in films.

For the i7-9700k processor, what the doctor ordered. I lowered the voltage, because it is too high by default, it's useless, it only heats up more and eats electricity. CPU core - 1.252 V (maybe I will still reduce) VCCIO - 1.232V VCCSA - 120226 V 4800 MHz keeps stable on all cores, in the AIDA stress test the temperature is not higher than 75 degrees. Fans spin 1000-1200 rpm. The maximum power dissipation (TDP) was seen in the region of 130-140 watts. The same picture when encoding video. In…

An excellent cooler for everyday life, I think any percent, simpler than the i9-9900k, it will cool perfectly and quietly. The cooler has really great compatibility. Its pros: - For i9-9900k, in stock, in a closed case, it's enough, but it's tight. - Under Prime95, with AVX, this percent emits 220 watts, at a frequency of 4.7, and the temperature with this cooler turns out to be 98-99 degrees, in a closed case, the percent at the same time, sometimes throttling. - Prime95, without AVX, emits…

In a fairly "stuffy but quiet" case, the Fractal Define 7 shows 30 degrees in idle and no more than 75 degrees under 100% load on the Intel 9900K.

This is the 4th or 5th CPU cooler from Noctua and my impressions are extremely positive Buy white overlays and it looks very good in the case Keep in mind that it is large, and with overlays it becomes a little more

It's like nhd 15 only fits asus apex boards and other special cases. The main thing with it is that even very high RAM modules can be used! When installing, do not forget to put the radiator in the right way, because, unlike nhd15, it is shifted upwards, and not symmetrical, otherwise everything is also self-made. You can also add a second cooler to increase efficiency In the HAF X case, the 7700k processor warmed up to a maximum of 80 on the linx test in 1.5 hours. and without the second…

The tower is huge, consider the size of the case, but there will be no problems with component compatibility: memory chips will fit with high heatsinks, and in the S revision, the heatsink design is shifted away from the PCI slot, which prevents it from being close to the video card. If you wish, you can install a second fan, but for its home non-extreme overclocking of the i7-6700K at 4.6 Ghz, the cooler copes with one, despite the fact that the speed does not exceed 900. I didn’t like the LNA

I bought to replace the untimely deceased Swiftech H220X - the pump died. Dropsy took a year ago because. I thought that it would be quieter than an air cooler and, as I now understand, I miscalculated on all fronts: the NH-D15S works an order of magnitude quieter (ten times), i. E. including the computer - I can't hear the cooler working or not (but it works)! The cooler coped with the cooling of the stock i7-4790 under LinX effortlessly: the temperature was kept at 50 degrees at a speed of no

I changed the platform, at the same time I decided to write a review about the cooler. Before that, I cooled 6700K, now 8700K. Moreover, it copes with the cooling of the latter even better (thanks to the increased crystal area). Even one fan is enough for high-quality cooling of the processor in any load (during idle, the fan is completely set to stop). Thanks to the asymmetric design, it allowed to maintain convenient access to the processor power connectors on the MP. Thanks to the cutouts at