🔧 Enhanced OTC (6529-2) Car Ball Joint Adapter Set for Chrysler/Mitsubishi Review

nice set. Plates are needed to replace the lower arm ball joints on new Chargers, 300s and Magnums (I have a 2006 Charger). Advantages Good design. Lots of adaptors. Disadvantages A small adapter was missing. The plates contained no screws. No plastic shell. Disadvantages are not an obstacle. To find the missing screws, go to a hardware store and purchase two grade 8 1/2-13 x 2 inch screws. They work great.

Required lower ball joint replacement kit for a 2007 RWD Charger. This kit (along with OTC 7249) was all I needed. Make sure you don't use a punch, just a long pry bar, some lube on the threads, and some heat on the spindle. It would be nice if the individual parts were cheaper. This wool set was not much more expensive. So now I have a bunch of adapters that are most likely unused. It would also be nice to have a hard case option to keep it organized. Screws for 2 flat plates are not included…

Expensive but it certainly got the job done. Something to consider. It doesn't come with the screws in the picture. This is a separate detail of the non-prescription sale. If you're cheap like me, you'll head down to the hardware store only to find that those screws seem like something special. They appear to have a coarse thread of about 11mm. However, in the place I went, they weren't. So I just took some 3/8 bolts that were long/full threads along with some wings and standard washers and a…

Received this adapter kit today. Everything pictured was in the box except for the screws shown in the 2 piece adapter. These are not included. Pretty good set, each adapter is good quality and marked with a part number for easy identification. Parts list/diagrams have been provided. There are 22 full pages in total. Before I forget, there are those who will ask if this set is made in America. To answer the question now, before I start asking "Is this USA or America?", no it is not. The box…