🔧 Enhance Performance and Safety with KEMIMOTO Power Steering Parking Brake Kit for Polaris RZR Razor 1000XP and 900S Models (2015-2018) Review

Installed on a 2019 Turbo S4 Had to re-use the factory bolts as the bolts supplied have a different thread pattern but work great. Secure the brake. Of all the $$$ I've invested in this business, this is probably the best investment I've ever made. 100% recommend and can't understand why Polaris didn't factory make this.

As other reviews have said, the pictures in the instructions are black; and you must use common sense. Reusing factory bolts for Polaris RZR, mine is 2019. The supplied bolt that actually hits the brake lever was too short. I only had a thread or two and the barley touched the lever. I went to the hardware store for a longer screw and everything is fine. Use a thread locker.

Although my year's RZR wasn't listed, it was a good fit. The nose of this part that presses on the brake lever could be a bit shorter. I adjusted it completely, but it puts a lot of pressure on the brake. I want to remove another 1/8 inch from the nose. The two screws that came with the kit are actually the wrong threads so I just reused the existing screws. that it was intentional, I would buy it again.

This item should fit several RZR models. However, it did not fit my 2019 RZR. The mounting bracket seated correctly on the power steering unit, but the brake lever hole was off-center and at an angle that didn't directly contact the brake pedal. I was able to get it to work but I had to lengthen the holes in the bracket to get it lined up. Also, the adjustment screw that screws into the brake lever was too short, so I had to buy a longer one. Save time and money and go for a different design—at

2017 RZR XP1000. I thought the stock screws were too short. Started tearing when putting it on. There is not enough thread left to be sure to add thickness to the bracket. THE SCREWS SUPPLIED ARE WRONG THREADS AND I AM NOT THE FIRST ONE TO MENTION IT. I took the screw to a hardware store and got an equal length fine pitch thread. However, I found that a washer was needed as the bolt in the steering housing bottomed out before the bracket was tightened. DO NOT REMOVE THE THREAD. KEMIMOTO MUST…

This is a pretty easy install if you skip the instructions that come with the E-Brake grip and let your intuition guide you. I installed this grip on my 2021 Polaris RZR Trail Ultimate. Instructions with photos are printed by a black and white laser printer. The images were very difficult to interpret. I gave in and let my instinct guide me through the process. The instructions only made sense after I figured out where the mounting bracket would be installed. I installed the handle in this…