🔌 Enhanced Inline Ethernet Voltage-Current Testing with GEN2 POE Tester Review

So far I've tested this on a few PoE network switches and PoE intermediate injectors that I have with very mixed results. The two mid-range 60-watt atomizers I tested with worked great. It turned on immediately without having to turn on the "PoE Device Simulation" switch. The Cisco switch I tested it on did not turn on or pass power until I turned on the Simulate PoE device switch. After turning it on, I was able to turn the switch back off and it continued to work. Another mid-span PoE…

This PoE Texas Tester Gen 2 is a great tool! It does everything you need. And don't settle for less (or more expensive!). We urgently needed to determine performance metrics for a critical emergency communications deployment, including multiple AREDN MESH nodes that require <= 24 VDC (minimum 12 VDC) for a total power of 12 W (1/2 A). This system sits at the other end of a rugged 23ga AWG Cat6 outdoor cable and is powered via passive PoE for 100 feet, potentially many hundreds. probable…

The engineers behind them are top notch. Unfortunately, probably because of the managers and CEOs, this was done as cheaply as possible. First, the font size on the display is about 1 point. If you don't have the vision of a 10-year-old, forget it. And if you're over 40, reading glasses won't help either. Time to pull out the magnifying glass. Also, it's a scrolling screen that makes it difficult to read. Also, they used VFD. This is a vacuum display case. They are invisible in the sun…