🔧 Primefit Pri-6044 IK1016S-20 Deluxe Air Compressor Accessory Kit with Recoil Air Hose: Enhance Your Compressor's Efficiency! Review

I have a small leak at one end of the hose where it goes to the push on fitting, very small/slow. The included connections are of average quality. They seal pretty well, maybe just a small leak, but not bad, nothing that would keep my compressor running all the time. Use 2-4 turns of the provided Teflon tape on the threads.

We bought this hose replacement kit for our small compressor. We chose this set because we lost some of the tips from our original set. It lasted less than a year. The hose has a large hole through which it attaches to the compressor unit. In addition, the air cartridge is jammed and often more air comes out of the tire than in. I would recommend a higher quality set.

I bought this accessory kit, fitted a hose with one of the two hoses on the connector and it didn't connect to the Bostitch compressor which I also received. This device was poorly made and did not fit into the compressor's socket. With a bit of persuasion, it fits into the included socket. The rest of the parts worked as expected.

WHAT I DON'T LIKE:1. This kit is addictive. Very cheap, fragile parts. Almost useless.2. Completely useless tire pressure sensor. WHAT I LIKE: 1. Somewhat useful, at least for quick couplers. They can be expensive if bought separately.2. The hose is ok but doesn't last long. In general, this kit can work for a while. It will break soon and I will regret not investing in something more permanent.

When connected to a hose, the air shock blew a lot of air through the internal valve. I disassembled and found that the central parts (see photo) were displaced by welding. This renders the cartridge unusable. Bad quality control. Not worth the hassle of returning it, but it does cost me the price of a better air chuck (probably 1/3 the cost of this set). Other parts of the kit seem to work fine.

Received this while having had similar kits in the past and although I was just looking for a speed dial and found I wasn't buying quality products I am still disappointed with the lack of quality. The tire gauge broke on first use and the blow gun has less flow than others I use and requires an adapter to attach inflation needles which seems unnecessary. All airgun nozzles could easily use one thread size and one of my fittings has a small leak although I haven't tried to find it yet. The tire

I bought this hose kit to replace my old compressor hose that came with my little road compressor that I have in my truck. It comes with some decent quick disconnects, but the hose itself is a flimsy piece of junk. As you can see in the picture it has ripped apart despite a small coil spring for protection. This hose is too thin to be reliable and doesn't even compare to my last one. Luckily I had duct tape in my truck, so I taped it on as best I could to inflate the tire enough to get home…

Mixed set. Hardware is fine. Fast connections are decent. Decent quality fittings. The tire pressure sensor is useless. The problem is in the hose. Fittings are pressed into its end without a clamp. Because of this, they regularly go outside and lick. Because the hose is made of fairly hard plastic, it doesn't seal very well even with a clamp. As long as you don't pressurize the tank or unplug it after use, you're fine. It is probably suitable for hobbies, e.g. B. Inflating balls, blowing…