🛢️ Efficient Queflago E8012S Universal Electric Fuel Transfer Pump: 12V Inline External 5/16inch 5-9PSI Gas Diesel Compatible with Marine Carburetor Review

This pump was just what I needed for my old Hydromac skid steer loader. Quickly filled up the fuel system. Only 4 stars because I only used it for a few hours. but for the money it looks like a good buy

After replacing the $79 Edelbrock electric pump several times on a forklift at work, I found this pump. This is suitable for installation over the tank and sucking fuel instead of gravity delivery. And for $22! And nothing against Edelbrock pumps, they just aren't designed to suck fuel. The original pump looked exactly like this and lasted over 8 years. My problem is solved once and for all.

This pump was used as a transfer pump and worked better than expected. My son and I work on a truck that hasn't been driven in several years and the old fuel was the first thing that went away. I used alligator clips directly on the battery and it kept rocking. Does it work like a real fuel pump? Probably, maybe? Of course why not. Many thanks to Derek from VGG! Troubleshooting seems easy with this guy. Derek is my spirit animal!

I bought this to transfer fuel from the tank into 5 gallon fuel cans. I set it up on 05/19/21 to test it out before the return window closes and it worked fine (started for 3 minutes). Then I had to use it on 05/23/21 and it worked fine for 1 minute then slowly lost the ability to pump until it stopped pumping gas and I went through the return window. Thus, the pump had less than 5 minutes pump down time. The engine was still running in it, I could clearly hear its work, but it wasn't pumping…

The only instruction is on the pump with an arrow clearly indicating which direction the fuel is flowing. So connect the hose or pipe that goes to the carburetor (I connected the fuel filter directly to the pump and then to this hose). However, the filter is also hooked in at the bottom of the pump, I decided to hang it at the top. It has some nice parts, but there are also some torn ones, like the white teflon tape that is terribly wound on one thread instead of two, which is NOT for petrol. I