🔲 Ravinte 10 Pack 3" Flat Black Drawer Pulls - Cabinet Cup Pulls, Kitchen Hardware, Cabinet Handles, Drawer Handles Knobs - 3 inch Hole Center Review

These poles were so easy to install! I like the look of the mugs but they were more expensive in store! I was afraid I would get a cheap product but they are strong. As long as you drill holes accurately (I have a template), you can quickly install them to add the finishing touch to your kitchen or bathroom! At first I had problems with the screws, the short ones were too short and the long ones were too long. BUT this company sends long thumbscrews. We simply cut them with the inside of the…

The tie rods themselves are fine, but I had to deduct two stars because the screws were an absolute nightmare. The short ones were too short for my drawers and the long ones were too long. We spent a lot of time trimming them, but some of them didn't work because they matched the smooth sections of the screw, which meant they popped back out and couldn't screw in flush. I also bought door handles, but Revain Basics and the long ones that came with them were just the right length, otherwise I…

Replaced all door handles and cabinet pulls in our new home. The color was spot on and the trains have a good weight. Well done, no cheap/thimble stuff. The only problem was that the hardware supplied was not suitable for our door thickness. Breakaway pins are a terrible design and I wouldn't waste your time messing around with them. Your best bet is to get some screws from your local hardware store to install the handles, depending on the thickness of the door face. I have nothing against the…

I was looking for some simple but attractive drawers for my kitchen to update the original ugly gold handles that are long obsolete. As other reviewers have said, these drawers are great and make such a statement in my kitchen! These tie rods are a lot cheaper than similar ones you can buy at regular big hardware stores and in my opinion they are just as good quality. Each cabinet handle has been packed in its own sealed packaging and covered with foam to protect it from scratches! The hole…

Interestingly the instructions are written for the North American market (measurements are in imperial units) but the screws provided conform to the stated JIS standard by a small point on the head of each screw. That means you should either use a JIS screwdriver or a flathead screwdriver, or be very careful with a Phillips screwdriver. You definitely *don't* want to walk into town with a head screwdriver. Due to the slight difference in design, JIS screws are easily damaged if the Phillips…