🏎️ Skunk2 Racing 309-05-1030 Alpha Series Silver 66mm Throttle Body for Honda B, D, H, F-Series Engines: Boost Your Engine's Performance Review

Throttle body installed on stock intake manifold d16y8 after removing the stock bolts from the intake manifold. The butterfly did NOT get stuck in the throttle body like cheap TBs do. Excellent purchase!

fitted to the 96 Accord f22b2 was perfect and the throttle felt easy to press and even added extra horsepower. The car works fantastic, no problems, it comes with a manual pack and sticker and some problems and solutions to help you if you have any problems

Looks good but will not fit 97 Honda Civic 1.6L engine. The only way to attach it is to mount it on the side, which requires significant modification and quickly becomes very expensive.

Exactly the same one I had but the previous owner messed up the threads on the throttle body. Bought as a replacement. Straight latch with all necessary hardware! Plug and Play (TPS and map sensor need to be replaced). Just remember to do a simple retrain after messing around with TB and adjust your TPS. I like it 100%!

TPS sensor does not fit properly on shaft and throttle plate is out of spec Cannot calibrate from 0.5V to 4.5V, you must resolve this issue before Installation or the idle speed rises and falls rapidly, the voltage readings must be accurate, the engine runs lean after the installation failed the emissions test (Honda tuning required), leave the throttle screw alone, do not try to adjust this (problem with stuck gas). , Skunk2 does not use shaft seal, only one bearing, do not use for turbo…