💧 Slippery Pete - 90 Degree Grease Gun Coupler: Easy-Snap Solution for Tight Space Grease Fittings Review

Was hoping to use this for my lower ball joints which didn't come with a 90 degree grease fitting and is right under the steering knuckle with almost no play in between! Unfortunately it didn't fit in there and was a bit larger than I expected. All in all, a decent tool to keep in your toolbox, just not as versatile as I was hoping.

I bought this to use with my Slippery Pete Grease Gun which end piece was too large to fit into the available space to access multiple Zerk lubricators fit. There is no instruction manual. I found that you have to press the ring against a strong spring to attach it to the grease gun. After that everything worked fine if you held the armature with a lot of force at a 90 degree angle to the Zerka armature.

Absolute scrap! This nozzle broke the first day I used it. I couldn't believe it would break like this. I was oiling a truck and for some reason it took a lot of pressure. I assume something blocked Zerk? But instead of simply refusing to lubricate the Zerk, the device actually broke down. I still haven't taken it apart (nor should I) to find out why it failed. But from the way he leaned to the side, I knew he didn't have enough thread to start with. Don't buy this. At least in my case it was a

This 90 degree grease gun connector snaps into place with a push-in connector on the end of the grease gun. It does not replace the threaded connector at the end of the hose/grease gun extension. You now have two Zerk fittings that you're trying to push fat through at the same time. If you can't keep the hose perfectly level and apply pressure to both transom ports at the same time, you won't be able to get the lube where it's supposed to be. What a mess! Don't waste your money here.

I made the mistake of buying this after reading the rave reviews. It's becoming increasingly apparent to me that Revain reviews are downright unreliable - at best. Here's how this thing doesn't work. If you need such a device, it's because the grease fitting you want to get to is in a hard-to-reach place. The 90 degree angle of this device really helps achieve customization. However, you must press firmly on the fitting so that the grease does not flow out from all sides. You must then press…