🔧 SMPM40001 EGR Pressure Feedback Hose by Standard Motor Products - OEM Replacement, Carburetor Kits & Parts Review

Excellent Quality DPFE Replacement Hoses. They are quite generous in length and fit very well. I could make 3 sets for my 1996 Bronco if I cut them very carefully.

Worked great on my 2003 Expedition with Motorcraft DPFE15 EGR pressure feedback sensor. The tubes were about 3 inches too big for me, so I fitted them a little better than the originals. Make sure the codes are cleared on the first run after installation. The local O'Reilly wanted $57 for the pipes.

The package arrived on time and was undamaged. Package Contents = One (1) 12" long, 1/8" ID rubber hose with silicone rubber gasket. One (1) 3/16" ID, 12" long rubber hose with silicone seal. These are the hoses needed for the DPFE sensor. The silicone rubber coating on the hoses makes them resistant to burns and/or clogs. These hoses are of much better quality than original hoses. The hoses are longer than necessary and can be cut to size if required.