⚡️ Stinger SGP90200: Powerful 200 AMP Circuit Breaker for Ultimate Protection Review

The first one I received had a corner chipped off. Switch to Amazon, no problem. I installed a new ECU on the car, everything worked fine for a while. Then a few weeks later I pushed the red button to turn off the switch and disconnected the battery from my car. It didn't work as my machine still had power, but the lever clicked indicating it had worked. I tried to push the lever back in, but it popped out again. Now I have to go through their painful warranty process where I have to remove and

This is a terrible circuit breaker and should not be placed on the market due to its misleading amperage rating. As others have said, it doesn't have nearly as much power as the rating suggests. This circuit breaker also has bad contacts as they arc internally and have wreaked havoc on my arcing fault detectors. I went insane trying to find the culprit in my solar system and was surprised to find that all my problems went away when I replaced this breaker with a fuse of the same rating. I…

I have a 3000w power tool inverter in my cars and I needed a powerful circuit protector. I know the inverter draws a lot of current so I decided to use this 200 amp switch. You get a decent product for the price. The rugged plastic housing can withstand some assembly stresses and the screw terminals are suitable for large diameter wires. The terminals have removable steel sleeves and are designed for smaller diameter wires. I connected a size 2 filler wire to mine - for those who don't weld…

I used this switch on my solar inverter. At first I thought it would work, but it started to shine under load. The outside temperature was 80 degrees. The breaker has an open circuit drop of 0.2 volts at 13.6 volts. With a DC load of 50 amperes, the temperature of the switch increases from 80 to 125 degrees in about 20 minutes. The voltage drop continues to increase with increasing temperature. My inverter shuts off at 10.5 volts when the switch hits 125 degrees. With a load of 100 amperes, the