🚗 SUPAREE Jeep Wrangler JK & Unlimited Spare Tire Delete License Plate Relocation Kit with Plate Illuminate Light & Third Brake Light (2007-2018) Review

What can I say about that…. It's a great new look when removing the fifth wheel, but I had a hard time getting the wiring right because the directions weren't clear on which color went where. I routed the wire to the rear light on the passenger side.

holes didn't match up at all. I had to pierce for light. Also for drainage holes. The top is wide open and the water has nowhere to go but your door. Do I have the wrong light or something? Very disappointed with the directions. I'm glad I can knit.

That's why some people say no-spec or no-spec. Yes, but it's not exactly a missile operation. The holes don't line up exactly, but close enough. As for strength, it's pretty strong enough. Has held an 8ft Feuerstik CB whip at 70mph for nearly 300 miles. The wiring for the lights was a bit backwards, but that's not impossible to fix.

A solid product with some caveats. As mentioned in other reviews, the mounting holes for the third brake light are disabled. I drilled new holes which turned out to be about 3/8" from the pre-drilled ones (thankfully the light hides this!). A simple task, but everything should work from production onwards. Instructions: Terrible. Take your time and triple check yourself. And the gauge of the wire could be thicker. I don't like subtlety/cheap but it will work.

The holes for the light to be switched on didn't fit at all. I had to cut new holes. There is no gasket in the kit, I did it myself on a foam tape. The design isn't the best, closed on three sides but open at the top so it can draw water like a bucket. I drilled two drain holes in the bottom of the bracket to allow it to drain. If you're wiring a third brake light to the JK, it's best to route everything all the way to the taillight assembly. To update. The company contacted and offered a…

Pros - Solid steel and looks great. Cons - the holes don't line up and the wiring directions could be made a lot easier. We made it smarter that the directions include the appropriate wire colors, not just positive and neutral. I had to ask a friend to touch the wires while hitting the brakes to figure out which wire went where. The colors of the cable extensions also differed from the colors that were previously attached to the brake light. The instructions also do not explain how to wire the…

The disassembly plate itself looks decent but the brake light comes with a long length of cheap wire to connect to the carrier wiring harness and two gold pieces (why gold? ) screws to connect it to the plate to be removed. My item was shipped without instructions. When I emailed them asking for a copy, they gave me a page with pictures and hardly any actual instructions. So basically you don't get any connectors or instructions on how to connect the lights. For 50€ I expect a little more…