Header banner
Revain logoHome Page
thermaltake suppressor f1 mini itx tt lcs certified cube computer chassis - black logo

Thermaltake Suppressor F1 Mini ITX Tt LCS Certified Cube Computer Chassis - Black Review

19

·

Very good

Revainrating 4 out of 5  
Rating 
4.2
🎒 Computer Cases, ⌨️ Computer External Components

View on AmazonView on ЯM

Media

(4)
img 1 attached to Thermaltake Suppressor F1 Mini ITX Tt LCS Certified Cube Computer Chassis - Black
img 2 attached to Thermaltake Suppressor F1 Mini ITX Tt LCS Certified Cube Computer Chassis - Black
img 3 attached to Thermaltake Suppressor F1 Mini ITX Tt LCS Certified Cube Computer Chassis - Black
img 4 attached to Thermaltake Suppressor F1 Mini ITX Tt LCS Certified Cube Computer Chassis - Black

Photos by authors

(13)
img 5 attached to Thermaltake Suppressor F1 Mini ITX Tt LCS Certified Cube Computer Chassis - Black
img 6 attached to Thermaltake Suppressor F1 Mini ITX Tt LCS Certified Cube Computer Chassis - Black
img 7 attached to Thermaltake Suppressor F1 Mini ITX Tt LCS Certified Cube Computer Chassis - Black
img 8 attached to Thermaltake Suppressor F1 Mini ITX Tt LCS Certified Cube Computer Chassis - Black

Details

BrandThermaltake
ColorBlack
MaterialSpcc
Hard Disk Form Factor2.5 Inches, 3.5 Inches
Cooling MethodWater
Motherboard CompatabilityMini ITX
See 5 more

Description of Thermaltake Suppressor F1 Mini ITX Tt LCS Certified Cube Computer Chassis - Black

Enhanced Expansion and Versatility

The Thermaltake Suppressor Certified Computer CA 1E6 00S1WN 00 offers exceptional expansion capabilities, making it an ideal choice for computer enthusiasts seeking a versatile and accommodating computer case. With the inclusion of modular drive racks, this case allows users to install up to 4 data storage devices effortlessly. Furthermore, it supports a dual expansion slot VGA of up to 255mm, enabling the use of powerful graphics cards for immersive gaming or demanding graphic-intensive tasks. Additionally, the case can accommodate a tower CPU cooler up to 140mm, ensuring efficient cooling performance even for high-performance processors. The high wattage PSU support of up to 180mm allows for the integration of robust power supply units, while the generous 80mm cable management space helps maintain a clean and organized build.

Interchangeable Panels for Personalized Builds

A standout feature of the Thermaltake Suppressor Certified Computer CA 1E6 00S1WN 00 is its interchangeable side panels, designed to empower users to create systems that reflect their personal style. The symmetrical panels provide a balanced aesthetic and allow for easy customization. Whether you prefer a sleek and minimalistic design or a bold and vibrant appearance, this case offers the flexibility to achieve your desired look. Additionally, the inclusion of two magnetic and removable side filters, along with a removable PSU dust filter and adjustable shockproof rubbers built with the bottom pane, ensures that your system remains clean, free from dust, and well-protected.

Efficient Cooling and Compatibility

The Thermaltake Suppressor Certified Computer CA 1E6 00S1WN 00 excels in delivering outstanding cooling performance, ensuring that your components remain thermally optimized. The case features dual modular 2.5" / 3.5" drive bays, providing ample space for your storage needs. Furthermore, it offers support for an ATX PSU and a DIY liquid cooling system, allowing you to explore advanced cooling solutions for overclocking or maintaining low temperatures during intense usage. Whether you're a gamer, a content creator, or a professional seeking a reliable and efficient computer case, the Thermaltake Suppressor Certified Computer CA 1E6 00S1WN 00 caters to your needs with its cooling prowess and compatibility with high-performance components.

Where can this product be used?

Here are some examples of environments and setups where the Thermaltake Suppressor Certified Computer CA 1E6 00S1WN 00 can be effectively utilized:

  • Home gaming rig: Create a powerful gaming setup with high-end components and efficient cooling.
  • Content creation workstation: Utilize the expandable storage and cooling options for handling large media files and demanding editing tasks.
  • Professional workstation: Build a reliable system for complex software development, data analysis, or graphic design work.
  • Home theater PC (HTPC): Set up a compact and stylish entertainment center for streaming media, gaming, and multimedia playback.
  • Virtual reality (VR) station: Construct a VR-ready system for immersive gaming experiences and simulations.

    • Great Expansion: Install up to 4 data storage devices w/the modular drive racks, a dual expansion slot VGA up to 255mm, a tower CPU cooler up to 140mm, together with a high wattage PSU up to180mm, and still offers a 80mm cable management space. Interchangeable Side Panels: Symmetrical panels allow users to build the system with personality. 2 magnetic and removable side filters and 1 removable PUS dust filter and 1 adjustable shockproof rubbers built with bottom pane. Outstanding Cooling Performance: Dual modular 2.5" / 3.5" Drive Bays. ATX PSU and DIY liquid cooling system Supported. Minimalist I/P Ports Design: 2x USB 3.0, 1x Headphone, 1x Mic Top Ports. Warranty: 3 years

    Hide

    Reviews

    Global ratings 19
    • 5
      6
    • 4
      11
    • 3
      2
    • 2
      0
    • 1
      0

    Type of review

    Revainrating 5 out of 5

    The quality is at the level, I am satisfied with everything.

    The axiom of absolute ideality, which states that everything beautiful should be square or, in extreme cases, cubic, works perfectly here. With one small nuance. It is necessary to throw out the front panel and transfer the USB connectors to a thread somewhere else. Fortunately, the wires leading to these connectors were long enough to carry them anywhere. I zakolhozil directly on the front panel. See pictures. I am sure that it could have been done beautifully, but I live in the countryside…

    Pros
    • Doesn't scratch hands The thickness of the glands is not annoying No complaints about color or fit. Got a GTX 970 270mm and dropsy for it from Arctic Cooling
    Cons
    • The plastic fasteners on the front panel break off. It is impossible to put a dropsy radiator outside the case in place of a large fan without a file. Radiator blowing with an external large fan is noisy. Without it - insufficient, the whole body is heated.

    Revainrating 5 out of 5

    Good quality product, I rate this purchase excellent.

    The case is excellent, you should not expect a miracle from it. If the heart is powerful, then it can be cooled with water, because I didn’t find normal towers under 9900. I took it to drive it new and for experiments before assembling a serious one. 2800r. I assumed that I would finish. Well, that's how it happened Mom on i390 in a place with 9900k - hot, put water, took the simplest one for 3tr. 120 * 240, she perfectly stood on the side of the places under the HDD. I peeled the lid a little,

    Pros
    • Small, beautiful, easy to disassemble, light. Possibility to install dropsy with radiators 120*120 and 140*140, video up to 285mm.
    Cons
    • And you can find fault with the pole. Small cases have little space, this is natural. A card with a normal developed air cooling cannot be stuffed, only the referee is not very good or water, and that is in question, you need to measure the height of the refrigerator, the top cover may not close due to the water and output tubes.

    Revainrating 4 out of 5

    The product is really good, I'm glad I bought it.

    It was the only mini-itx case found on the market for 30 cm vidyuhi. The PSU is located under the horizontally positioned mother, which leads to all the features in terms of height and interior space. I would have preferred a 6-8 cm lower case for a thin CPU cooler, but there were no such cases on sale - they were all shorter than necessary.

    Pros
    • Without a file, a vidyuha 30 cm long climbed All walls are removable without tools Has removable dust filters Conveniently located buttons and front connectors, there is a reset button Excellent access to hard drive mounting points Horizontal position of the mother Huge space for a CPU cooler Reliable legs Places for additional carlsons
    Cons
    • Giant height for a mini-itx form factor

    Revainrating 5 out of 5

    Excellent product, the best quality.

    Assembly Ingredients: -MSI H310I PRO motherboard -Intel Core i5-9400F Processor - Power Supply Hiper HPB-550SM 550W ATX, 80Plus Bronze - Computer Case Thermaltake Suppressor F1 CA-1E6-00S1WN-00, Black - RAM Corsair CMK16GX4M2A2666C16 16Gb -SSD drive WD WDS250G1B0C 250GB - cooler deepcool gammax c40 - two passive exhaust fans at the back of the deepcool xfan 80. - video Radeon Sapphire nitro 570 8 gb (length 260 mm)

    Pros
    • A folk case for mini-itx, fits into a square cell of a standard Swedish rack with a large margin. It is not difficult to assemble the system, anyone can figure it out, all covers are removable, they are attached without a screwdriver. The equipment is good, there are rubber shock absorbers for the screws, nothing makes noise. Good big quiet case cooler. Plenty of space inside, no cooling issues.
    Cons
    • The disadvantages are justified by the price: -The case is actually not small and could accommodate a mATX board, you never know what comes into your head later. -The power/reset and USB buttons are not located on top of the front panel. - a transparent wall made of acrylic, not glass - plastic and the appearance of the front panel is not BOSH

    Revainrating 4 out of 5

    A good product at a good price, I advise you to try it.

    I will briefly describe how I remade the AM4 board for matx: 1. We take the dimensions from the plug of the motherboard and mark the cutout for it on the case. It comes out almost almost to the end of the body (does not reach somewhere 3 mm for the edge of the plug) 2. With a jigsaw / grinder / hacksaw we saw off the marked piece of the body 3. We glue the sawn off piece with epoxy on the other side of the hole for the mat plug. fees. It turns out as if we have shifted the hole for the…

    Pros
    • I took it for specific niche sizes, the ability to install a matx board
    Cons
    • the front panel is easily pulled out if the case is moved by it

    Revainrating 4 out of 5

    I am satisfied, the product fully corresponds to the description.

    That was the only mini-itx casing for the 30 cm vidyuhi that could be obtained on the market. It is possible to access all of the functions, including those relating to height and internal space, because the power supply unit (PSU) is situated beneath the vertically oriented mother. It would have been ideal for a thin CPU cooler to have a bottom case that was between 6 and 8 centimeters in height, however the available cases were all far shorter than what was required.

    Pros
    • Even without a file, a vidyuha that was thirty centimeters in length rose. Any wall can be removed without the need for tools. Includes removable dust filters There are front connectors and buttons, including one that is situated conveniently, and there is also a reset button. Good accessibility to the mounting points for hard drives Position of the mother in a horizontal plane Massive room for a computer processor cooler. Reliable legs More locations for carlsons to be rented
    Cons
    • The mini-itx form factor has a gigantic height.

    Revainrating 4 out of 5

    As such, there are no disadvantages, it is convenient to use.

    mATX I stuck: for this it was necessary to expand the cutout for the bar. I flattened the brackets for screwing the card, drilled 1 new leg for fixing the board (there is nowhere else). I pasted strips of polyurethane foam on the platform under the motherboard, and put the motherboard on them, securing it with a single screw. Holding on. But in this version, there is no space left for a 3.5" hard drive, and the SSD simply lies around the power supply. It is more difficult with a video card: a…

    Pros
    • Small body length, and at the same time fit a full-size video card. Separate air intake for the power supply. Identical 3 covers - transparent can be put anywhere. 1 huge quiet fan. Mesh on the air intakes.
    Cons
    • Unsuccessful use of space inside the case: mATX also fits into it, but it is made in such a way that only mini-ITX can be installed on a regular basis. The body walls are thin and bend easily. The legs are very flimsy and too high. The air paths are poorly thought out: there are slots around the large fan through which air escapes back, there is no mesh on the lower air intake of the front cover.

    Revainrating 5 out of 5

    I do not cease to rejoice at the purchase, a very good deal!

    Mesh at the bottom to protect the power supply from dust, mesh on the sides with magnets, walls with quick-release screws on four sides. If you decide to shove a large computer into itx format, take it, it's hard to find the best case. With its pros. A good design, designed for a full-size video card. The power supply does not hang over the motherboard as in cases of similar size. Its cons: All the same, do not compare with the case for thin-itx. I would like the same but without taking into…

    Revainrating 4 out of 5

    Practical product, nothing to complain about.

    The walls are interchangeable, I put the wall with glass on its side, and it seems to me that it looks better, at least in my case, when everything sometimes piles on top, it makes some sense. Has some pros Very solid, although the steel could be thicker, although it is not thin, it is ordinary. During the assembly process, there were no problems at all. You twist it as you like, you can crawl everywhere, all the wires from the PSU can be brought to the front-lower segment and laid perfectly…

    Revainrating 3 out of 5

    Nothing special, there are positive and negative sides.

    when buying a case, immediately take care of the selection of fans for blowing - it will be hot without them. Also, support for CPU coolers up to 14 cm in height narrows down their choice. Well, if you think that this body is tiny, you will be disappointed when you see it live. Has some pros quiet 200mm fan on the front panel, support for ATX power supplies, convenient dust filters that can be easily removed Cons below: not very efficient cooling system - without additional exhaust fans, hot…

    Revainrating 4 out of 5

    I like it, thank you for the quality product.

    We assembled a home computer on i5 with a full-fledged video card, a 14 cm cooler tower stood up easily and there was still a headroom. In terms of cooling, everything seems to be normal, in addition, you can put two 80mm on the hood, but so far, like a standard 200 on the face, plus 120 on the processor cooler directed to the back wall is enough. Some pros: Ease of assembly, all walls are removed, making it easy to install components and lay cables. Good workmanship, nothing dangles, does not…

    Revainrating 5 out of 5

    I'm very happy, it really is worth buying.

    The front cover is solid and the air from a single fan swells sideways. When the computer uses a lot of resources in games or rendering, there is not enough airflow. You need to open the front cover.

    Pros
    • Small size but fits a full-fledged gaming PC. 5 out of 6 possible walls are removed. You can climb anywhere. All grilles have dust filters on magnets. Very easy assembly. There is a huge fan, very quiet.
    Cons
    • Didn't find any particularly bad ones.

    Revainrating 4 out of 5

    I am happy with everything, the product matches the description.

    For one of the cheapest cases of this format, it will do. Different pros: It is disassembled almost completely, to the frame, even the bottom is removable. Inside there is a place to neatly twist and tidy up extra wires, the lineup itself is quite rational. It looks unusual, looks good as a piece of furniture. With its cons. The dimensions are such that it doesn’t differ much from the usual midi-tower case, and it’s much more difficult to shove the stuffing in there, especially laying the…

    Revainrating 3 out of 5

    Not the best quality, but generally not bad.

    Another attempt by another manufacturer to shove the unimpressible - to make a "small case" for assembling a "gaming computer". In practice, cramming a normal "gaming computer" into it will be quite hemorrhoids. The standard fan with a 3-pin connector is very audible at full speed. The walls are loose and there are gaps. There is no cable management. The USB-3 cable is almost half a meter long and hard as a stick. The power connectors are stupidly labeled. The power/reset buttons are wobbly…

    Pros
    • Price tag, dimensions, large fan included.
    Cons
    • Many small flaws, misunderstandings and imperfections.

    Revainrating 5 out of 5

    I am amazed at how well the product is made, just magically!

    Nuance - before the cutout of the "window" for the video card, I advise you to remove its socket, you still won't install it with it (the vidyuha sticks out a bit from the case) and try on the cutout like that. It turns out neat and more or less beautiful. You just need to figure out how to close the hole in the case, but you can’t see it, and also think about how to fix the video card all the same (in my case it rested on the case and does not play, but this is still not Feng Shui). There is

    Pros
    • Everything didn’t fit into the comment section, so it’s like that. Mat. ASUS B350m microATX board, ASUS RX560-O4G video, Xilence M403 cooler 1. We dismantle and throw away the sled for disks, 2. Trying on a mat. and video boards on a shelf in the case, note how much you need to cut under the motherboard and under the video card, 3. Cut out: it turns out that you need to cut 5 centimeters under the motherboard (straight to the edge of the case), a couple of centimeters under the video camera (cut off part of the ventilation grille). It is better to cut with an electric jigsaw, do not take wire cutters, you can also use a hacksaw, but it is not very convenient - it will go to the side, the cut will be at an angle (but if there is no jigsaw, it will roll anyway), 4. We put the bar from the mother, and the board itself on the shelf. We mark the holes on the shelf for fastening. The microATX has 3 holes at the bottom of the board, the rest fall into an empty place. We remove mother, we drill. 5. We take bolts m6x20 (it can be both longer and narrower, which is available). We insert it into the holes from the bottom, tighten it with a nut from the top, then a washer and another nut, such a "buter" is just under the existing 4 racks so that the board lies on them, 6. Isolate the existing racks, I pasted the blue one on them! (required :) ) electrical tape, 7. Before installing the PSU and if you have a 2.5 disk, take it and screw it on the left side (when viewed from the back of the case) onto the shelf in a vertical position. There are holes in the shelf, of course they do not coincide with the holes in the disk, therefore it is better to drill under the second bolt (I scored and instead of drilling I glued it on a 2-sided electrical tape), 8. If there is a 3.5 disk, then it can be hung on the same side directly on the wall (in the upper part! Where is the motherboard): in the vent. the grate matches 3 holes with a 3.5 disk, if you put it at an angle a little. I screwed it through the dust mesh: I twisted 3 holes in it with a screwdriver and put it on the complete screws with rubber bands, 9. Well, then the assembly: we throw all the cables, put the PSU, "string" the motherboard onto our 3 pins, tighten it with nuts from above, connect the cables and the front panel.

    Revainrating 4 out of 5

    Nice price, good quality.

    The interchangeability of covers is an interesting constructive solution. But to ensure noiselessness, you will have to refine the case - redo the mountings for the case fans, power supply and cooler, add gaskets for the legs and stick cover seals to eliminate rattling. In general, this is one of the most successful cases in this format present on the 2022 market.

    Pros
    • Price, installation without difficulty, the best compromise between volume for computer giblets and compactness. No frills design.
    Cons
    • Claims not to the body, but to the concept of the PC. For a multimedia PC, there should be no audio connectors on the rear panel at all, as well as all sorts of different interfaces such as USB, spdif, etc. - they should all be on the front panel. Behind only the power supply and video connector. So it would be more convenient to work with connected equipment. And in the existing concept, you have to invent all kinds of laces and adapters, hubs, splitters, etc. An unsuccessful concept has created a market for "utilities" that could have been avoided.

    Revainrating 4 out of 5

    What you need, a cool purchase, I advise you.

    I took it to build a system on mini-ITX. The priority was to use a standard PSU and place the system unit on the table. It would be possible to take a small mATX case, but I decided to experiment and try to take this cube from Thermaltake. I liked the case, but there is no desire to take it again, I described the shortcomings above. Of course, the scratched acrylic of the transparent wall can be replaced with glass, but this is only in the plans for now and is not critical for me, so I scored…

    Pros
    • + The most important thing is the ability to use a standard ATX power supply + Convenient layout of parts inside, I liked to assemble the assembly +Can install water cooling +No problems fit medium and large video card, see specs + There are good removable dust filters + Quiet large stock fan + Good body hardware +Easy access to hard drives + PSU at the bottom + Absolutely all walls of the case are removed + Stylish black cube shape.
    Cons
    • - Acrylic transparent wall scratches quickly -Front plastic panel could be made more breathable by adding grille or mesh on the front - Fits only mini-ITX motherboards - Vigorous blue LEDs on the front side panel -Only USB 3.0 on the front side panel -Only two 80x80 turntables can be placed behind - this is archaism.

    Revainrating 4 out of 5

    I expected mediocre quality, but the product was pleasantly surprised.

    Spent some time trying to improve the supply ventilation. As a first step, I replaced the stock fan with a Noctua NF-A14 PWM, but placed it inside the case. As a result, the distance from the fan to the blank wall of the front panel has increased to about 35 mm. The PCB airflow improved somewhat, but the HDD became hot. Removing the front panel in this case also affected the temperatures, but much less than in the case of a standard fan. Obviously, with this placement, the fan operates in a…

    Pros
    • A well-thought-out case design that allows you to quite comfortably place a productive air-cooled system in it. In my case, it was a lightweight workstation for working with architectural design and video editing programs. The machine was assembled for use at home and it was important to ensure not only small dimensions, but also silent operation, including in hot weather. I borrowed almost all the components from another assembly: I7-8700, ASUS ROG STRIX Z370-I GAMING, 32Gb DDR4 3466MHz Kingston HyperX Fury, MSI GTX 1060 AERO ITX 6G OC, 650W SeaSonic SSR-650PX. I used a Noctua NH-U9S cooler and Noctua NF-A8 PWM exhaust fans. All fans connected to the motherboard. The result pleased: even on heavy tasks such as rendering, the fans operate at medium speeds and, if you do not put a heavy load on the video card, the machine remains almost silent.
    Cons
    • Height. This is more of a natural limitation of the small body, rather than its disadvantage. Increasing the height will change the whole concept, but. to reduce noise, it was desirable to use a video card with a more powerful cooling system based on two fans. The cards from MSI seemed to be the most interesting, but about one centimeter of case height was not enough. Another centimeter would make it possible to use full-fledged tower coolers. The regular fan is located behind the blank front panel at a very small distance from it and pumps air from the slots on the side faces. This design greatly reduces the efficiency of air intake: removing the front panel leads to a drop in processor temperature by as much as three degrees. The temperatures of the motherboard and disks go down by 5-10 degrees. The thin plastic of the front panel is somewhat prone to vibrations. It manifests itself at a high fan speed as the appearance of weak high-frequency components in the noise spectrum. Not critical, but slightly irritating. I had to slightly deform the side panels to ensure a good fit to the frame in order to eliminate possible vibrations. After that, the assembled body became completely monolithic.

    Revainrating 4 out of 5

    Everything is fine, there are only minor drawbacks.

    The case looks very nice, a classic. Only the manufacturer limited itself to the form factor of ITX boards, but this case can fit mATX in size, but the manufacturer decided differently and, accordingly, the internal design is useless, the same applies to the location of the USB ports, if the case is placed to the left of the monitor, then they can be used completely not convenient, however, and when the block is on the right, it’s also not very usable (IMHO), what prevented them from being…

    Pros
    • - exterior classic design - performance quality
    Cons
    • - ill-conceived interior design - inconvenient location of USB ports