💾 Toshiba DT01ACA050 500GB 7200rpm SATA 6GB/s Internal Hard Drive - Reliable and High-Speed Storage Solution Review

bought for an office typewriter of the second freshness, instead of a dead screw due to the use of specific software, it was necessary to use win XP but as it turned out, this screw is not designed to work with this OS And this is not an isolated marriage. ? id=11:44460 I have the same results as the author of the topic

This hard drive comes with 1 platter, which means: 1. Higher noiselessness. 2. Traditionally higher reliability. 3. Less heat. 4. Drops / vibrations are less dangerous for hard drives with 1 platter than for those with 3-5 platters. Initially, I wanted to take a Hitachi hard drive, because. I have confidence in this brand. But Tohiba did not disappoint.

In general, it is only suitable as a second spare disk, when I just stood as a drive, there were no problems, it was worth putting an OS on it, it started: vibration, clicking.

How satisfied with the disk, it has been working for 4+ years as the main disk. It makes sounds if you listen closely, but I don’t notice them, the system unit is not right next to me. Good disc for the money.

Model ID TOSHIBA DT01ACA050 Serial number Z3NAAD7KS Version MS1OA750 I have been using it for more than 2 years, no problems, it is somewhat noisy, but this levels out its high performance - 190Mbps read 175Mbps write. Sometimes it seems that there is an ssd in the system, the OS loads so quickly and programs start quickly.

Has pros: Decent read / write speeds, no vibrations (as I understand it is a lottery here) Cons: Was purchased on 06202222 worked out the warranty period and, infection, fell down on 08202222.

At work, they imposed computers with the cheapest components, with the exception of the processor. On one computer out of a dozen, I didn’t remove the hard shutdown after 20 minutes by default in the power settings, as all windows after xp like (and 7 is installed specifically). The result - on this computer, the hard died after a year of work. Of the rest, where I turned it off, the first one died just now, two years later from the purchase. The rest are still working.

I can’t understand why everyone swears that the screw is very loud + vibration from it. I don’t know about you, my screw is generally like a drowned one, not only does it not cause any vibrations to the case, it doesn’t even make noise when working with it, only if you bring your ear to the screw itself, then you start to hear buzzing and rattle, which should be with active access to the hard drive. At least for now, some pluses from it, let's see how reliability will show itself over time.

I took it for 1000 from my hands with a range of 300 hours / 70 inclusions, the production date was almost 20 months before purchase. Smart by registers 01, 05, 07, C4, C5, C6 by zeros. There were errors in C7 and other small, not significant ones. After connecting, there was a strong general hum and a stable sinusoidal, sooo annoying. I accidentally discovered in the BIOS that I have it connected to the sata3G connector instead of sata6G, of which I have only two on the asus microATX…

I was pleased only with the price, otherwise it's just a miserable something. Frequent freezes and disk loading at 100% when Skype is running and opera in which 3-5 tabs are open. Also, when Windows ates are installed, it is often loaded at 100%, when installing games, or downloading large files (games, movies), download drops up to 100% are also common. Lags, freezes and 100% loading not only in Windows 10, but also in Windows 7. I don't recommend buying it.

There are no complaints about the noise, only if you put your ear on, you can hear activity, worked in an office computer for 2.5 years, started to slow down, reassign sectors, later smart changed to BAD. But it can be attributed to dignity that he did not immediately die, but began to swear, in this mode he lived to buy a new one (3 weeks), healed with a check-disk and was cloned by Acronis to a new one.

I didn’t choose it, I assembled another friend’s computer to work on a PC, I have to work with it, I don’t need it for games, basically it’s only for working with docks, sometimes it freezes, if I played something on this computer, I think I would throw hard from the window. A bunch of bad sectors and everything connected with it. There is no way to return it under the guarantee, there are no docks and the guarantee is over, I'm waiting for it to be completely covered in order to put another…

Reading reviews about other HDD manufacturers, I hoped that this company (Toshiba) might not make bricks? Yeah, it wasn’t there . None of the utilities saw it either, although hope dies last. Due to the type of activity, you sometimes have to mess around with hard drives . So WD for 160 GB in 2022 when working in 12-hour mode 5 days a week . has a health of 95% . and this new scrap metal . in general, you understand ( (And so I wanted to screw on the gigoff Pisot ((

Stand in RAID0, are mainly used for video editing. In this configuration, they provide a read speed for large files of the order of 300 Mb / s. Pretty decent and even comparable to some SSDs, and taking into account the ratio of price, speed and volume, it turns out to be a good budget option for relatively fast processing of large amounts of data. To store important data, it's probably better not to use them, it's wiser to find something slower and more reliable :)

Put to replace two obsolete screws 500 and 200 gigs. They began to vibrate strongly, I already began to worry about the information. Read a bunch of reviews and reviews here. I took it at my own peril and risk, because. the price is attractive. I've been using it for two weeks now. The screw does not vibrate! Maybe I'm lucky, of course. Although I have a case made of good steel (0.8 mm), maybe that's why.