🔌 C218UNVME Ballast Programmed Factor by Universal Review

This ballast replaces the existing ballast on my Panasonic FV-11VQL4 unit. As another reviewer noted, if you installed a dual bulb and connected the wires as close to the old ballast as possible, you don't need to make any additional connections. Just plug the existing wires straight into the new ballast. Since the yellow wires go into both sockets, since you have dual terminals on the ballast you can connect a pair of wires from one of the sockets to the front of the ballast's yellow terminals

Perfect replacement for my Panasonic bathroom fan. Although the instructions are limited, it's quite simple. Two wires from one bulb go to blue, two from the other bulb to red, and one from each bulb to each yellow. Earth and hotter go to the back. If you cut the wires from the old ballast as short as possible, you can still attach them to the new ballast. I didn't bother with the night light.

This replaces the ballast in a Panasonic bathroom light/fan/heater. It arrived a day early, included everything in the description and, given its small size, corresponded to the position of the original ballast with space requirements. As mentioned, it starts with a delay of about 1 second during which it powers the filaments in two CFLs before they glow. I was able to use the original lamp socket wires as I cut them flush with the original ballast. If you don't, you'll need to add splices. The

This ballast replaces the existing ballast on my Panasonic FV-11VQL4 unit. Connect the wires as close to the old ballast as possible, no need to make any additional connections, just connect the existing wires directly to the new ballast. As for the yellow wires that connect to both outputs, since you have terminals on the ballast you can connect a pair of wires from one of the outputs to the front of the ballast's yellow terminals and connect a pair of other outputs to the side yellow…