Upgrade Your Jeep Wrangler JK With LEDKINGDOMUS Front Bumper - Rock Crawler Style With Durable Winch Plate And Powerful LED Lights Review

I added this to the wife's 2017 JKU when she went to 35's. For the record her wheel and tire does weigh approximately 100lbs, definitely on the heavy side. Easy to install and looks great. This is what she wanted, something that swings out together with the door and didn't break the bank. I also added the in tire brake light ring and eliminated the 3rd brake light.We experienced the shaking and clunking that other reported. By design it seems to not be a tight snug fit against the door due to…

This bumper was higher quality than I expected. The packing was double boxed/stapled together, and the box arrived with no damage at all on the corners. the finish was very nice, with no chips or flaws. It is very heavy, and will take 2 people to mount it up comfortably. It looks just as good as any $600-$800 bumper, at less than half the cost. The bumper bolted up perfectly, with no vehicle modifications required.HOW TO INSTALL:1. Remove oem bumper (if you can't figure this one out, you better

Pros:Its sturdy and looks great. The price cant be beat.Cons:The receiver setup for towing is a little chinsy and far less engineered than the OEM towing package for JK's, but I have pulled a teardrop camper 10 hours 1 way to Yellowstone and back with it, as well as various other places in the remote woods and mountains, with no hangups. As others have stated, the receiver is slightly larger than your standard towing hitch making towing noisy and banging up your hitch. I had hooked up the…

Just put this thing on about a week ago, and so far I like it. I read all the reviews, and the most common thing I saw was people saying it rattled and was noisy. On my first drive I agreed with the people who had issues. After a few days, I decided to look at it, and try to figure out what was the issue. I noticed that with the tire on, and the tailgate closed, the tire carrier was not against the rubber bumper that mounts to the bracket on the back of the Jeep. I adjusted it to the point…

This is a NICE bumper. It is not less quality than the expensive bumpers, and has features I like much better. The swing-out system works very well, and if adjusted properly there is NO noise (2-door soft top JK - I hear everything). Not a bad install, but just throw the directions away because they are pointless. Remove old bumper and the two old brackets on left and right of hitch. Remove factory hitch. Slide mounting brackets in frame on each side. With two people (I did it myself and highly

Loved the instructions and the organization of the hardware, love the look of the bumper and how much clearance it gives over the stock rear bumper nice smooth bearings in the swing arm. Only downside is the shaking, will need a modification to the adapter for the spare tire to the swing arm bracket will attempt to modify it myself so try to keep from having the spare tire come loose going down the road and damaging the swing arm would probably be better to just sell it with a one peice bracket

Lets get one thing straight right away, this bumper is about 70% cosmetic and 30% function. If you're looking for something to smash through Moab, save your money and get something heavy duty. That being said, it will work as a recovery point for light to middling difficulty trails. The steel is about 3/16" thick, and I find that to be a good middle ground between weight and strength for a daily driver/weekend warrior.Installation is a 3/10, if only because the LEDs require a bit of wiring…

Ordered 2, one for me and one for my dad, first arrived having punched through the box, finish was scratched off on one of the corners. Second arrived missing one of the nuts for the LED light bar, meaning the light bar and fascia over it were falling off. Easy enough to fix and once installed both looked great, the LED is brighter than my corner spots.Although one came with 1 wire plus harness off the fog lights, the other came with 2 wires plus the harness. Not sure what the second wire is…

Way more positives than negatives.Positives:Fantastic look! I like lights and this adds a lot of light to my front end.Solidly builtLights are bright but positioned low enough to keep you out of troubleThe grill guard is also solid and looks greatNegative:Heavy, but all quality rock crawlers will be.Had to drill holes in grill guard to thread wires so the wires aren’t hanging out. With the solid build, it took a little time.I gave a lower rating for easy to install because I suck with…

This was far easier to install than I had assumed it would be. The only time I needed a second person was when putting my 35” spare tire on the mount(that dude is HEAVY). The finish of the bumper seems to be thick enough, and I didn’t have any chipped off upon arrival or during install.I was a little nervous, based off other reviews, about rattling, but if you snug the tire carrier up to the rubber bumper, there is zero rattle. I’ve taken it on the highway, off road, over speed bumps, and…

Terrible directions - if this is the first time you've ever done something like this, get professional help or buy a different brand - tells you in initial steps to use bolts that are way too big for side mount (the ones that acctually hold center mount in later steps). The only way to determine this is trial and error followed by process of eliminationand its confusing for someone that knows what they are doing so a biginer would get totally confused, frusterated, and eventually want to return

The bumper is solid but the spare tire mount needs to be stronger, tire bounces around alot had to do some fabricating That's my feedback!

The hitch assembly in the middle of the bumper was seated approximately 3/8" to far back/towards the under carriage, not allowing the pre-drilled holes on the bumper to align with the holes on the frame.

Great for the price. Bumper is solid, and sturdy. Not a fan of the plate to mount a plate, to mount the tire plate…. Should be welded.Dislike: this spare tire will NOT stop wiggling around. Mounted sturdy, but the channel holding it moves way too much.

Great so far just installed it few days ago! instruction are horrible we just did our own thing and watched a video also to make sure. But other than that there is no rattling anymore from spare and a great product for the price!

Love the look, lights and ease of installation… HOWEVER, i sheered a bolt completely off while installing this. I don’t want to go through the hassle of returning this but I don’t think it’s safe to drive around with only 7/8 nuts and bolts holding it down.

hated this bumper at first but after I busted out my miller 251 and made some improvements this bumper is excellent. Note the powder coat is junk be ready to have it sandblasted and recoated soon. But for what I paid for this I'm happy