🔌 10pcs Upgraded Tiny Whoop JST-PH 2.0 Male & Female Connector Cable for JJRC H36 H67 Blade Inductrix E010 E013 Batteries Review

So I use them on my Axial SCX24 where I replace the stock ESC/RX with another one that doesn't have PH2.0 JST connectors Has. These allow me to maintain standard battery/motor connections, so I can fall back to a stock ESC/RX block if I want to. Has worked flawlessly. Red to red and black to black wires soldered. It seemed to fit with no problems.

I am buying this item to fix the broken LED bulbs in the renter's fridge. They were too small when I received them, mini. I also tried to contact the seller to let him know that he replied and asked me what type of drone I have. I told him it wasn't for the drone but to fix the fridge light. He became unresponsive which I find disrespectful, I had no intention of returning it at such a low price. Just give advice. CM. Never again

Haven't used them yet but this is a basic 2 pin plug. I bought these to complete the renovation I'm doing with the motion sensor ie. battery replacement. I figured that one day I'd have to change the battery again, so I might as well install it with a plug. TA Dah. If you look at this, you'll know how useful these little stubs can be and how hard they can be to find. I ordered them and received them all within a few days. Since they are inert, simply connect the cord to the plug. I fully expect

A word of warning: I was originally looking for extensions and typed this into the search bar. These were some of the first results. These are male and female braids, NOT male extensions. However, the description and pictures are NOT misleading, I just wasn't paying attention and assumed they were expansions. The product itself appears to be of good quality. The wires are the same gauge as the batteries using these connectors, the wire insulation is flexible, and the connectors are solid. No…

My Sony STR-DN1080 came with a useless little VHF antenna cable. I have a 4 element VHF antenna on a tower 60ft up and wanted to use it. It has a 75 ohm coaxial F connector. I bought these little cables that fit the Sony STR-DN1080 connector and used a 75-300 ohm transformer (balun) to convert the coax to two wires and soldered the 300 ohm transformer wires to the red and black wires on this plug and It worked great converting a coax cable to a Sony STR-DN1080 FM jack on the back of the…

These connectors successfully mate with other JST PH2.0 BUT for some reason (technically for the random drone they were designed for?) the red ones and black wires have switched places. EVERY LiPo battery, controller, sensor, etc. I have ever owned or worked with has plus/minus in opposite positions. I know the electrons don't care what color the wires are, but stupid people will reverse the current direction on most devices they can use them on. Wire markers to prevent this, but if you think…

Great for my needs (adafruit batteries) but reversed polarity. You can use them as is but let them indicate the colors are wrong, or you can reverse the polarity yourself. This is pretty easy to do. Find a very small screwdriver, pickaxe, tweezers, or something with a tiny pointed end and gently pry the small tab on the connector, and then pry the wire out of the connector. Do the same with the other wire, then reconnect the wires to the connector with the correct polarity. Gently tug on the…

Excellent. They are of high quality and high load. The wires are heavier, the pens are good quality, and the pens are each held in place with a latch that prevents the stylus from being pushed in or out, but allows you to lift the latch and remove the stylus and reinsert it , if you want to swap places. Polarity. I was fed up with cheap extra thin wire and plugged pins in cheaper kits and was glad to find them. I have used several kits. One note - the polarity (red vs. black) was reversed in 8…

Love these plugs and cords. The wires look like 22 gauge wire. Red is positive, black is negative. But honestly, while this is a common color code, you don't have to follow it as long as you keep track of which is which when you plug it in. You may need to swap two wires when replacing existing mini-JST connectors for correct polarity. To swap them out, you'll need a tiny flat-blade jeweler's screwdriver, or what I use, a toothpick. You will slightly pry the plastic tab holding the end of the…