UREMCO 12-4 Fuel Injector 🔧 Seal Kit - Enhanced SEO, 1 Pack Review

They didn't leak my injectors. I decided to clean and reseal the injectors. The upper O-ring that is in contact with the fuel rail has broken, causing fuel to leak out. Couldn't even last 10 hours.

Came with everything described and everything fitted perfectly. I used some boiled water that I let cool a bit, dipped the pintle tips in and lightly pressed them to the injectors with my hand. I drive a 1986 Toyota pickup.

No trunnion caps are included but I don't mind too much as mine are in good condition and I haven't had to replace them. If I needed them the rating would be lower. The parts I really needed are included. I give it 4 stars because the parts I need are correct and the kit arrived on time.

I decided to check and clean the stock injectors with a test injector cleaner and test with a 12v battery with air passed through it. This repair kit matched the prefect and wasn't overpriced. TIP: An easy way to remove the old grille is to use a flat-headed wood screw, put it in a vise and screw the injector onto the screw, then pivot the grille and pull out. Install the new screen and tap lightly with a hammer until it is seated.