Voodonala Stainless Steel Antidust Rushproof Door Hinge Pin Bolts Guides Liners Kits for 🔩 Jeep Wrangler JK JKU JL JLU Sports Sahara Freedom Rubicon Unlimited & Gladiator JT 2/4-Door, 8pcs Review

Best invention ever for easy door alignment during reinstallation. It's very easy to see exactly where they line up and slide right into the loop. A must-have for no-doors summer fun!

I recommend them to anyone who removes doors frequently. Installing a door is MUCH easier with rails and helps avoid the inevitable denting and chipping of the hinges. Installation was very easy as they simply screwed onto the existing pin threads.

Wow what a difference removing the doors. Now I can open and open all four doors in just a few minutes with minimal effort. I was a little hesitant to keep the bottom nuts off the hinges because I've seen forum posts of excessive dirt, salt, sand etc getting in there and causing problems. Not only do these things solve this problem, but they also make it easier to remove the doors and attach them to the hinges. You look good too.

I decided to try these kingpins after I scratched one of my hinges trying to straighten the door when reinstalling it. The product arrived quickly. The costs are great. Installation couldn't be easier. The studs don't go into the top stud as much as the bottom stud and this helps the doors align more easily. Installing doors has never been easier. This saved me a few minutes of struggling with each door to align them and make sure I didn't scratch the hinges again. Can't recommend her enough!

If you already work with door hinges, it pays to get it right. I installed them when replacing hinge bushings and repairing pivot pins. After scraping and polishing the light rust and debris on the door hinge bolts, I screwed them in and tightened them with pliers. Be careful when tightening them with pliers or whatever when holding them near the end as they will get scratched and worn and then look awful. Also, don't press them too hard or they'll crush them. They are very useful when…

You get enough for the top and bottom hinge for your JKU. Here's a hint. Install only half of it. I mount them on the top hinge of each door and it makes it a lot easier to align the doors (because one hinge pin is actually longer than the other). This also allows you to insert standard screws into the floor. Loop if you think it's a security issue. Cosmetically, they're a little clunky for my taste. They protrude slightly from the underside of the hinge shaft. They're not ugly, but if you're…

Disappointing that the top pin is not drilled and cut a little deeper to sit flush and that's why I gave this 3 stars. BUT with a drill and a tap you can do it yourself. These pins were on my 2020 Jeep Gladiator Rubicon. To make both the top and bottom pins fit, you need to make (2) changes. 1) Take a 13/64" drill bit and gently deepen the hole. Do not drill through the pin 2) Use an M6x1.0 tap (again with a piece of tape so you know when to stop) to drive the new thread all the way in and cut…

I removed the door hinge nuts from my TJ when I first got it almost two years ago. Since then I have searched for a number of such manuals. Finally bit the bullet as it was a great price. Unfortunately, in my rush to install them on my Jeep, I didn't realize they were for JL/JK. I can confirm they are NOT suitable for TJ. However, I will say that these guides are quite heavy and feel good. And while I can't use them as trunnion guides as intended, I found I could use them as a quick release nut