🛢️ Walbro F90000267 High-Flow 450 LPH E85 Fuel Pump Review

I ordered 2 of these pumps to make my own N54 stage 3 fuel assembly! These pumps work excellently in all boost pressure ranges!

Damn yes. If you drive an E85 and have more than 1000cc injectors, this boy will feed them. Also buy a filter kit which is separate for some stupid reason.

Great little pump. I bought one for my sc300 but thought I needed more power. You need two of these to maintain 900 hp. on ethanol or 3 if you want up to 1400 hp. Excellent quality for this price though.

The pump looked great but didn't work. I only installed it to find out it's just good paper weight. I'll try them in a second round. If the product turns out to be defective I will ask for my money back and will never order from this salon again. Free cable kit and filter would be nice on my second order

I bought 2 of these pumps for an engine dyno. Both pumps turned on, but the fuel did not pump. I checked the wiring, I correctly connected the plus and minus according to the columns on top of the pumps. Double checked and triple checked to make sure I'm getting the correct voltage and my ground is fine, but nothing. I switched plus and minus and the pump pumped like a monster. Incorrect conclusions about the pump. He worked backwards. The red wire marked + at the top of the pump was actually…

These Walbro pumps are actually genuine Walbro/TI automotive pumps after researching and comparing other reputable Walbro suppliers. I agreed that all Walbro pumps have QR codes and e85 pumps have metal vanes. The Walbro 450 is manufactured in two different plants, the OEM plant in Tennessee applies QR codes to the pumps while the second plant which now makes most aftermarket Walbro 450 pumps does not apply QR codes to these pumps . The Walbro 450 pumps, as well as the 255 l/h pumps, use two…