WALI Articulating Extension 200X200Mm 1339LM W Review

The mounting holes in the brackets that attach to the TV are too big for the supplied screws (parts h). I can't use big bolts because my TV doesn't accept them. You need to put washers or make the holes smaller. I can't be the first to notice this (you can see it in the photos if you look closely), maybe my Panasonic 32" is too old. Otherwise it's a solid mount, just a little stiff. Another mechanical issue is that the head of the bottom screw hits the end of the main pivot bolt as you screw it

Two major flaws essentially raise this hangar from four stars to one. First, when using the wide VESA mount extensions, the supplied M4 screws to attach the plate to the TV will not work. The sockets are too small for the large holes in the extensions and fit right through. I had to find sponge washers to make it work. Also, the long version of the M4 screws are too long to use with standoffs. They fit into the Vesa mounting holes. Second, the screen tilt function is realized with Stone Age…

I am a professional installer and have installed hundreds of mounts from almost every brand since 2005. For the price you can't go wrong. about iron, but that's okay. The people who broke the bolts either didn't drill a hole big enough or not deep enough. Use a 1/4" bit and drill as deep as you can and use a ratchet instead of an impact wrench. There should be some resistance, but if it gets too tight you'll have to dig deeper.

It's hard to beat a swivel mount at this price point unless it's a piece of crap. Luckily, this mount is pretty good. The content was clearly labeled and easy to identify. However, the instructions may require some work, which is why I gave it a 4 instead of a 5. If you are only using the center plate for a 100x100 or smaller VESA mount, then simply align it. However, if you are using 200x100 or 200x200, you will need to install extendable brackets. When installing, do not tighten the levers…

So I'm like a very skilled girl and this thing has been a bit of a struggle. The directions are really unclear, the order of the parts is unclear, and the extension pieces on the bracket to get to the TV holes are very difficult to straighten, they move and you have to tighten a couple of times to get it right make. Also, I used my own screws and anchors because the included screws are ridiculous. You will need a drill and some tools. He also speaks in full motion, but leans neither forward nor

This is a great product. It's durable and fits my 200mm x 200mm mounting holes on my TV. how to properly install and use the mount. The mount itself is 5 stars, but I took a star off because the attachments are very tight at the pivot points on the arm, particularly the point closest to the TV. I have to move my arms back and forth for about 15 minutes for the joints to loosen up enough to stand up and another 10 minutes for them to be relaxed enough to be used. that it could break out of the…