Wotefusi Rear Brake System Kit for Dirt Pit Trail ATV Quads Buggies 125Cc - Brake Disc Rotor Disk and Parts Set Review

Great product but the recommended hub does not have the exact hole pattern in the brake disc. You will need to drill a new pattern into the hub or drill through the brake disc. Just upside down.

Works great. Great product for the price. The only problem I found was that the hose between the caliper and the pump was a bit short. It is also difficult to find a suitable shell holder. I had to drill new holes.

Great product and price! If you use it on a homebuilt kart it works great. My 10 year old can easily skid on the road and that will stop my 200+ pound go kart too. Very happy.

The screws provided don't even go through the disc holes, they need to be drilled out. The line is very short. I had to drill the recommended holes in the hub because none of the holes lined up with the disc. You need to make fasteners for installation. hope it works when i'm done.

Bought for 1/4 the price of a kart kit. I had to make a bracket and lever. But that block locks up the tires so quickly it stalls my engine before the clutch can disengage if you're not careful. I have now bought 3 for all my cards. Best value for money if you don't mind making your own brackets

The system itself is fine. The caliper works and is still under pressure. No leaks. BUT the mounting part is the worst. The mount is designed in such a way that you have to be very imaginative to put it anywhere. And now there is a manual. I had to find a welder to make it work. And after the first start, my disc warped. Dissatisfied.

This system has been a great deal and now I am thankful for it. I've learned my $60 lesson: always verify that the components work well together before the return period expires. I was building a kart from scratch and after putting everything together I found that the caliper didn't close tight enough to actually stop the cart. It was both a disappointment and a relief. It's frustrating that I now have to order and wait for another braking system before I can test drive my newly built kart, but

Downgraded to one star because either this device is defective or simply doesn't have much gripping power. It moves the calipers and pads, but it doesn't push on the rotor enough to slow the wheel. Thinking it was either air in the system or a weak/faulty master cylinder, I bought another master cylinder with an external reservoir that I could easily check and fill. This allowed me to force the brake fluid through the entire system to remove air bubbles. Still no grip power. Should be in the…