Header banner
Revain logoHome Page
wyzworks rainbow multi color 1.75mm pla thermoplastic polylactic acid 1kg 2.2lb 3d printer filament logo

WYZworks Rainbow Multi Color 1.75Mm PLA Thermoplastic Polylactic Acid 1Kg 2.2Lb 3D Printer Filament Review

3

·

Poor

·

$$
Revainrating 2.5 out of 5  
Rating 
2.5
🖨️ 3D Printing Supplies, 🏭 Additive Manufacturing Products

View on AmazonView on ЯM

Media

(4)
img 1 attached to WYZworks Rainbow Multi Color 1.75Mm PLA Thermoplastic Polylactic Acid 1Kg 2.2Lb 3D Printer Filament
img 2 attached to WYZworks Rainbow Multi Color 1.75Mm PLA Thermoplastic Polylactic Acid 1Kg 2.2Lb 3D Printer Filament
img 3 attached to WYZworks Rainbow Multi Color 1.75Mm PLA Thermoplastic Polylactic Acid 1Kg 2.2Lb 3D Printer Filament
img 4 attached to WYZworks Rainbow Multi Color 1.75Mm PLA Thermoplastic Polylactic Acid 1Kg 2.2Lb 3D Printer Filament

Details

BrandWYZworks
MaterialPolylactic Acid
Item Weight2.2 Pounds

Description of WYZworks Rainbow Multi Color 1.75Mm PLA Thermoplastic Polylactic Acid 1Kg 2.2Lb 3D Printer Filament

Density: 1.25g/cm3. Tensile Yield: 55Mpa (GB/T1040-1992). Flexural Strength: 1355Kg/cm3. Flexural Modulus: 4500Mpa. Thermal Distortion Temperature: 58°C

Reviews

Global ratings 3
  • 5
    1
  • 4
    0
  • 3
    0
  • 2
    1
  • 1
    1

Type of review

Revainrating 2 out of 5

Each color is like 50 Meters before the change

Jammed 3 times.The Rainbow effect only works if you have a really large print. Each color is like 50 Meters before the change.

Pros
  • Density: 1.25g/cm³
Cons
  • May be more expensive compared to other 3D printer filaments on the market, making it less affordable for some users

Revainrating 1 out of 5

Worst PLA I've ever used.

I have almost 6 years of 3d printing experience running a printer farm. This filament is the worst PLA I've ever used. It jams and print quality is poor compared to regular PLA by the same company. Will never purchase garbage again.

Pros
  • Tensile Yield: 55Mpa (GB/T1040-1992)
Cons
  • The rainbow coloring may cause inconsistencies in the final product, affecting the quality of prints

Revainrating 5 out of 5

Works better than they said it would.

I bought this for my walkin closet about 2 months ago. It claims to pull up to 10 oz. of water pre day and the tank holds 24 oz. at which time it shuts off. It needs to be emptied every 2 days during humid weather. So it's pulling more than 10 oz. a day. It's so quiet. I have to feel the air moving to even know it's running. The only thing that would make it better is if it had a bigger tank. If you have a small space I recommend this Dehumidifier.

Pros
  • 3D Printing Filament
Cons
  • The filament may require more frequent cleaning of the printer nozzle due to its composition